Software
Houzz Logo Print
bryan69_gw

Polycarbonate cover

18 years ago

This is my setup. If you look at the low roof you will see just poly. On the gable I have 46% shade. The back is facing the west so the sun starts coming in around 5:00 or 6:00.

{{gwi:473080}}

Comments (15)

  • 18 years ago

    This is the east side of the greenhouse where I get morning sun
    {{gwi:473081}}

  • 18 years ago

    Hi Bryan, looks like a good set up you've got there, and the plants obviously relish the conditions. I like your 'Bromeliad Trees', a great way to utilise the virtical growing space. What is the timber used for construction?

  • 18 years ago

    See tree hangers for response
    Bryan

  • 18 years ago

    Bryan,

    That is a mighty impressive greenhouse, your plants obviously enjoy the environment.

    Attached is a link to an old article about lighting effects on Broms through coloured fibreglass that you may find interesting.

    Rick

    Here is a link that might be useful: Illarwarra Bromeliad Society newsletter

  • 18 years ago

    Hi Wise Folks....I have been a lurker on this forum for a couple of years now; learning much from all of your contributions and drooling over your pics! Now I need advice; so thought I would be brave and speak up.

    I am a Bromaholic, and therefore I am running out of space in my (suburban) property. So..I have re-modeled my front yard and added an area IN which I will be housing Broms.

    I would like to use Polycarbonate for the roof - this will allow me to control watering.

    My advice need is around what type of poly I should use. I could use the product &/or manufacturer names; but they would mean little to any non-Aussies. So...I am wondering if this poly-data would suite Brom growing please?

    Translucent, ivory colour with Light Transmission of 35% and shading co-efficient of 0.35.

    According to the manufacturer (Laserlite XPT for Aussies)it..'lets light in and keeps the heat out...reflects heat carrying infra-red light and allows visible light to pass through. 99.9% UV protection.

    Any advice would be appreciated!

    Shane-the-Bromaholic

  • 18 years ago

    Welcome aboard, Shane-the-bromaholic, me ol' matey!

    I know nout about that technical UV/infra-red light stuff - I hope someone here can help you.

    Rick, thanks for that interesting link :)

    Bryan, that sure is an impressive set-up! How do you keep the summer temps down?

    K

  • 18 years ago

    Are just putting a roof on an area or enclosing the whole thing?

  • 18 years ago

    Just the roof

  • 18 years ago

    Any shade that will cover the area?

  • 18 years ago

    No shade from trees or such with sun hitting that area from mid morning till very late afternoon.

  • 18 years ago

    Depending on your year around temperature conditions I would provide some sort of shade, With a hard top the air movement is restricted

  • 18 years ago

    Hey everyone been out of the circle for a while. The polycarbonate i use is from home cheapo, I use 46% shadecloth over the gabel roof. on the lower roof I don't have any cloth. That is my test area to see how much light I can get away with. This time of year the sun is so far south it gets mostly sun through the side. Just a roof cover should be fine. I have a 20 inch exhaust fan inside the greenhouse with a thermostat set at 85 degrees.

  • 18 years ago

    Dear Bryan

    Excuse me again, what are the bromeliads marked 1, 2 and 3.
    Thanks!

    {{gwi:473082}}

  • 18 years ago

    1 is Neo Golden Chalice. A cross of kautskii and wilsoniana.2 is Morris Henry Hobbs x Eleganza. 3 Is Aechmea Fasciata Varagata

  • 18 years ago

    Thanks! Bryan
    I have been trying to find yellow ones to add to my collection.

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Columbus' Reliable Landscape Design & Contracting