Software
Houzz Logo Print
insaneavocado

New VFT

21 years ago

Okay, I got a new red dragon VFT from www.cobraplant.com

It has long thin spindly leaves that stick straight up in the air, is this normal? alot of the pictures I see of VFTs have sort of floppy and thicker leaves; but since alot of people reccommended cook's I figured that's how it's supposed to be. I was also wondering, how safe is it to give it a bit of tap water (I have my own well, so it isn't city water) every once in a while when one is low on distilled water and needs to get some more? And also, I just use tap water on my N. Ramispina and it grows fine, would that mean it's okay for VFTs?

There are some lower, smaller leaves that are sort of thick and sit low to the ground, they're turning black, is this normal? The area I have it in gives it 4-6 hours of sunlight a day, but it's broken up, as the sun moves a tree shades it and then the tree's shadow moves out of the way, is this okay to prevent burning of the leaves?

Comments (3)

  • 21 years ago

    Sounds like your new VFT isn't getting enough light. Since you got the plant from Sarracenia Northwest, you should keep it in direct sunlight pretty much all day ( The Cobraplant.com guys-who rock by the way-grow them to accept such conditions right when you get them). VFTs are very light hungry plants and will appreciate all the light you can give them, as long as the temperature doesn't scorch them. Temps between 80 and 95 degrees are usually just fine.

    As for tap water: NO! Nepenthes are much more tolerant of mineral laden water than any other carnivorous plant. Tap water will surely kill your new VFT is no time, so stick to distilled when you can. I can't really say how close your well water is to being distilled. I'm guessing you'd have to get that tested to be safe. Although I did talk to one guy on a forum that used well water and his plants grew just fine...Bah, I'm rambling! I guess it depends on if this VFT is your only carnivorous plant (besides your Nep). If so, buying distilled water for it wouldn't cost much at all. Now, if you have many CPs, then it's a different story and I would reccomend getting your well water tested.

    Now that I've confused you and myself, and I think I'll stop talking! Hahahahaha! If you have any more questions, feel free to post again and I'll try to help out.

  • 21 years ago

    Hi

    For a red dragon, yes that is normal.
    Your typical Flytraps have thicker leaves at the bottom and do get some "thinner" longer ones up top.
    The Red Dragon though has long upright leaves that are more slender in appearance to the likes of Dente, Typical and Giant forms.

    If it came from Cobraplant they would have been grown in full sun and should be fairly red in colour.
    If your red dragon has no red, this will tell you if it is not getting good light, the thin upright leaves though are perfectly fine.

    Cheers

    Sheldon

  • 21 years ago

    Hi

    For the well water a good investment (for any water) would be to get a lill tester, they not that pricey, I found a unit called "TDS METER 2" from www.WaterFiltersonline.com
    This will give you a reading in PPM of just how bad your water is.
    If you have a reading of 40 or less then it should be fine to use on your plants, if not then get either distilled water or a small R/O unit.
    I got one called the WaterMaker Mini, i got it from the same url that I provided up above for about 80 bucks, the replacement filters are around 40 and if you have your TDS meter as well the you can test the water to see when you need to replace the filter.
    It should last you over a year (I'm watering a massive pot of 5 pitchers, 4 different VFT's, 1 Nepenthes, a total of about 15 Sundews and a butterwort with this unit)
    So far the PPM has gone from 001 to 004 with all the gallons Ive been pushing through it.

    Cheers

    Sheldon

Sponsored