Software
Houzz Logo Print
genecolin

Something green to look at

16 years ago

While everything outside is brown, I have a few things on the inside that's green and keeping me from going insane. This weather isn't even good for fishing. Here is a Paradiso I started from a cutting I got from Herman2. I potted it with root initials on Feb 2, 2010 as the date on the cup shows. It's in my inverted blue cups with UPM and showing off a lot of very nice roots. I hope the rest of y'all are seeing some green. It must suck to live in the NE right now.

"gene"

Comments (25)

  • 16 years ago

    Beautiful Gene. Just beautiful.

    If we can figure out how to do it, we'll put some of ours up in a couple of days.

    Dave

  • 16 years ago

    Dave,

    This might help you with posting pics.

    Here is a link that might be useful: Posting pics at F4F and Gw/FF

  • 16 years ago

    Very cool. We'll give this a try tomorrow.

    Meanwhile.....it started raining about fifteen minutes ago. Hard. We're on a ridge, and the street is in a shallow valley between us and the next ridge. Since it only rains a few times a year, and we are on the side of a hill, many of our streets (mine included) flood and become creeks during the hard rains, which is what we are experiencing right now.

    Rain in the deseret is not real common and it's always special. Our hillsides were allready greening up from the rain we got last week, and, with temps into the low 70's predicted again for next week, this one oughta really get things growing.

    Thanks for the info for submitting pics. We'll see if we can get something posted tomorrow.

    Dave

  • 16 years ago

    Fantastic Gene!

  • 16 years ago

    Gene,
    Great pics and good to see this time of year.
    I know you were questioned in the past about your meathod for using the cups upside down but I only glanced at it.

    Can you please explain once more as to how and why you do this? What advantages do you gain?

    Rafed

  • 16 years ago

    Rafed, my original idea was to make it easier to get the root ball out of the cup with the least amount of disturbance to the roots. My plan is to put some mix in the pot, take the foil off of the cup and stand it on the mix in the pot. Then I will proceed to put mix around the cup as it sits on the mix in the pot. Next I will slowly raise the cup leaving the root ball behind while working the mix around the cup to close the gap caused by lifting the cup. If all goes well the root ball will not be disturbed at all. All in all I've found 2 other things to note. One is the cup is much stable and less easy to knock over and another is that the volume at the root zone is also much greater than a right side up cup. I havn't done my first transfer yet so I have to wait to see how well it works.
    "gene"

  • 16 years ago

    When you raise the cup, how do you get the new growth through the cup bottom?

  • 16 years ago

    Thanks Rafed for asking the question (why them upside-down cups?).
    I was just about to ask the same very question...

    Gene, I agree with you 1000% about NOT to disturb them
    tender fig-roots. However, I think that you are introducing
    an uncessary addtional step. What about the narrow top?

    All pots (and for this purpace - cups) have been (from neons)
    desinged with a wider top, I think, for an easy
    root-ball release.

    I for one, use foam cups. To transplant, I either hold
    the cup (unside down; yes) and YANK it down with a sudden
    stop letting Newnton's 1st law of physics do its thing, or
    I just get a sharp blade, (easy) slit the cup from 2
    opposite sides and split open the mass...

  • 16 years ago

    Thanks Joe but all credit goes to mother nature. I'm just trying to help without getting in the way.

    gorgi, To answer the question about the narrow top, well if the cutting branches like this one did it very easy to cut down the sides without disturbing the roots because as you lift the cup just a little it will leave a gap between the root ball and the walls of the cup making it easy to run down the sides with scissors. These cups cut a lot easier the the water bottles I used before. It may be an extra step but try one and see how much more area the roots have to grow and how stable the cup is. These may be the better advantages of the upside down cup.

    Here is a positive response from Tom who got to try it before I have. Check out the link below.

    Here is a link that might be useful: garden web

  • 16 years ago

    gene,
    I have had great luck using your inverted cup method.No
    root damage nor have I had a problem with hurting
    folage(using 32 oz. cup).I have repotted several with
    initials which have now formed substantial roots and I have
    done some with roots.This works great!I do use lid with holes for drainage rather than aluminum foil.Thanks for this idea. I will not use the convential methods anymore
    unless someone comes up with a better idea.
    Thanks again!Protect those roots and good luck with your
    plants when you decide to repot.So far all of mine(6 or so)
    are growing well.
    Tom Danville VA

  • 16 years ago

    Way to go Gene, that UPM makes for purty roots. I just got back from Texas where I bought it for $11.00 for the big bag.

    youngbonner

  • 16 years ago

    Hey Young, sounds like you hit the lottery. Any of your trees starting to grow yet? I have a flanders that putting on leaves. The rest shouldn't be too far behind if we get a few more day like yesterday. Days like that might get the fish to biting too.

    From the bayou,
    "gene"

  • 16 years ago

    Young, that is a good price for the big bag UPM. May I ask where in Texas you bought it? Thanks! Tim

  • 16 years ago


    Some of my newly potted cuttings.

  • 16 years ago

    This little guy was planted in October. (This is why we moved to Arizona). It never did drop any leaves.

  • 16 years ago

    Gene,
    I am still amazed of how some of us go through that
    extra effort(s) for them figs. Thinking hard, I do see
    one good benefit for the rooted twig (upside down cup).
    The root mass will come out as bell-shaped, which is
    consistent with roots being better spreading out, as
    they go down. However, I am still not sure if the extra
    work (plus more possible mishaps) is worth it?
    Please do not take this the wrong way (no offense meant)...

  • 16 years ago

    gorgi, no offense taken. I guess we could just wait until the weather's right and just go stick all our cutting in the ground and go about our business and come back later in the year to see how many took and then pot them up. But then again what fun would that be, and winters would seem twice as long.

    It might be likened to Al who has studied and researched to find a perfect potting mix. Or Dan working out a rooting method that gives 100% rooting success. I guess there are many reason we do things. For some of us it's the challenge of the project, for some it might be to make something more perfect, and for some it's just a grand way to waste time while waiting on our Maker, all the while causing no harm. I guess I'd probably fall into the latter category. I really like the old saying "if it isn't broke, don't fix it". Well on one of my recent transplants I killed a tree. So for me I consider the method broke, and since my method broke I'll try to fix it until I figure that it's fixed. Please note that I'm not saying any other method won't work. This is just me doing my thing.

    I think most of us are involve with figs as a hobby and hobbies are suppose to be fun. And you know what, I don't know about the rest of you, but I'm having fun.

    Blessings to all from the bayou that's slowly warming up,
    "gene"

  • 16 years ago

    Hi Gene,
    i hope it hurries up and warms there by you cause if it ain't warming there it sure is not here in my area darn it.
    I like your statement above this post (fall into the latter catagory)
    I also like to do different things with them somewhat just to see what happens in the off season which seems so darn long here.
    Best Health
    Martin

  • 16 years ago

    Thanks,
    There is no better saying than:
    If ones method works good, stay with it.
    However, experimenting is also good; one may discover
    some more benefits. As I mentioned above, I do see one...

  • 16 years ago

    Gene,

    Great response, And I mean that in a good way. Your a man of Wisdom. Thanks for reminding us it is only a hobbie to most of us, Including myself.
    I think your hard work and effort will pay off very soon and we can all learn from you. Thanks for sharing.
    If you would, I would ask you at this time to direct the warm air straight north, Maybe angle it to the 1 o'clock position from where you are at. I think that would be good enough.

    Rafed

  • 16 years ago

    My friends I have the will but not the power to send warm weather your way, but I do have a friend (...I call you friends..) that can and will. I'll speak to him later and put a bug in his ear. Perhaps he will speed it on.

    Happy figging from the bayou,
    "gene"

  • 16 years ago

    Gene, i have not tried your cup method but it look interesting . Its always nice to try different things i know i enjoy doing different at times. Cant wait for mail tomorrow and the next day to try some things. ; )
    Rafed,
    if Gene could send warm air it would be nice to angle my way first then i could have the fig gods direct it with lots of sunshine your way.
    Were going to climb into the high 40s and they say may hit 50s in a few days (bada bing !)
    heck im seriously thinking about moving the garden tractor and car outta the way wheel them out to let them get some heat of the driveway with some sun and give em a good drink, last season i started March 15th course then we got that darn ice storm along with snow i posted pictures of on figs4fun forum.
    Martin

  • 16 years ago

    Tim,
    Sorry for this late response, I bought the UPM in Fairfield Texas; Fairfield is on I-45, about halfway between Houston and Dallas. You may be familiar with Sam's Restaurant (landmark)there on the I-45 service road. The nursery is on the southbound service road, right across the interstate from Sam's. He also had many varities of oaks, peaches, plums and pine bark fines @ 4.00 a bag. Figs were Celeste, Brown Turkey and TX Everbearing.

  • 16 years ago

    gene,Well we had snow again yesterday.Hope this is the end of the mess.All of my rooted cuttings(9) have been repotted
    using your inverted cup method and are doing great.I lost
    my only 3 Sals(EL)cuttings to mold in baggies despite following cleaning , preventive measures etc. Will try to locate replacements.Next time I plan to use Spag. moss in baggies as I did with my other cuttings with no mold or rot.
    If you get too bored you can always clean up your fishing
    gear.Thats what I plan to do today while the snow melts.
    Regards
    Tom Danville VA

  • 16 years ago

    Martin, that's what I'm doing with mine. I put them out for some sunshine and move them back inside in the evenings. Last night we had a heavy frost again, so I covered my 2 in-ground trees that are loaded with breba hoping that they don't get frost bit. I'd hate to lose them again this year.

    Tom, I did the fishing tackle trick last weekend and I planning to go after them sac-au-lait (crappie)this weekend. They had better look out.Haha.

    "gene"

Sponsored
Franklin County's Heavy Timber Specialists | Best of Houzz 2020!