Software
Houzz Logo Print
pitangadiego

Roots 3

19 years ago







Here is an example of lots of growth and leaves, but not much root development.




Most of these rooted at the bottom, but this one has roots everywhere.

Comments (13)

  • 19 years ago

    Since the exposed roots in this series have vermiculite clinging to them, are we to understand that this is the stage at which you transplant them to pots with Perlite mix potting soil?

  • 19 years ago

    Yes, these were removed from the vermic and cups and were going to potting soil and pots (and into a "coldframe" to maintian humidity). Though this year I haven't been able to get the coarser Vermiculite, so the later cuttings are in 50% Perlite, 50% Vermic. I am having to experiment all over again. So far, it seems to be working as well as the all Vermic did.

  • 19 years ago

    Thanks, Jon. Glad you mentioned the problem with Vermic - I have looked through hell and high water for course Vermic this year, with NO success.
    I have potted about ten little rooted cuttings, and due to our nasty cold weather I had to bring them inside. The artificial heat of the house has showed up as stress on the leaves even though we maintain a humidifier 24/7. Times like these I still get jealous of your climate.....Elder

  • 19 years ago

    Elder/Jon,

    If you are looking for coarse vermiculite, try a commercial shipping supply company. The coarse is often used as packing material for liquids since it will absorb if there is a spill. I had called the company itself to find a supplier in Houston. I have provided the link to their website, although I seem to remember calling someone in Missouri.

    ~james

    Here is a link that might be useful: Sun-Gro

  • 19 years ago

    The same brand/supplier, with the same bags still supplies Home Depot, but the stuff inside is different. So, we adapt.

  • 19 years ago

    I got 2 huge 4 cu ft bags of coarse vermiculite early March from www.greenhousemegastore.com
    They were $13.00 ea. I can't remember the shipping price.
    Being a newbie, I overbought big time for what I used and didn't know if the price was good- now I'm really glad I bought it.





    I hope you can see the stuff in this pic.
    Christy

  • 19 years ago

    Looking' good!!

  • 19 years ago

    Hello Jon
    All your posts on fig cutting propagation have been so helpful to all of us. I tried a variation that worked well. I made a fig incubator :). I took a five gallon pail and filled 3/4 full of water and placed a fish tank heater in the bucket and put a top on the bucket. This provided the ability to control the temperature. Then I placed the plastic bag full of wrapped cuttings on top of the bucket cover. The heat would rise into the figs. I tried 90 degrees F and got poor results. 78 degree F produced roots quickly some in less than 2 weeks. I was able to successfully root all cuttings. The Black Mission was a surprise it produced roots in about 2 weeks but then stopped all growth lost leafs for about a month. Finally they are starting to grow again.
    I hope that the cuttings I sent to you rooted?
    Thanks again,
    Ed

  • 19 years ago

    Thanks to your rooting method Jon, I haven't lost a cutting yet...knockin' on wood- (my head)- hard!!! Even my slooow St Jean is starting to look very alive!
    Christy

  • 19 years ago

    A question: does it harm the fig in any way if you put the vermic and perlite into the potting soil along with the cutting when you pot them up into 1 gallon pots? That's what I did on my first one.
    And do you re-use that vermiculite on other cuttings once you remove it?

  • 19 years ago

    From my experience, once a fig is established, the potting
    material does not matter much (less one produces a
    SWAMP like medium).
    New fig cuttings should be rooted in a new (sterile)
    medium (to avoid rotting). After that the same used
    medium - mixed with other stuff can be re-used to pot-up
    well established rooted cuttings, but NOT as a rooting
    medium for other new cuttings (it is no longer sterile).
    George (NJ).

  • 19 years ago

    Do not reuse rooting medium. Use it in a potting soil mix. The potential problem with moving the rooted cutting with the Vermiculite to a larger container is this: If the soil mix in the larger container is faster draining, you will tend to overwater because the soil will feel dry, but the portion in the root zone (the Vermiculite) will hold too much water, potentially leading to root rot.

  • 19 years ago

    Ahhh....Ok...Glad I asked...I wasn't really clear on that point...I'll go in and take that vermiculite out...or as much as I can without damaging the roots...it has only been a week.

Sponsored