Software
Houzz Logo Print
ladywingr

Tomato supports

15 years ago

Show me! Please :-)

I tried to use stakes in the fall and the plants got much too large - all over 6 feet in containers - and once fruited, the stems would break.

From research, it appears the trellis system is best, but I can't quite get a handle on how the vines with fruit are supported - just by intertwining? I get a lot of info from reading, but I really would like to have a visual, and I didn't have any luck trying to search Tom, Silvia & Lou's pics of their support systems in the forum.

I'm thinking about using a system similar to what Earthbox sells, but make my own. Unfortunately, cattle panels are out of the question, no way to get them home.

Thanks for any help.

Terri

Comments (13)

  • 15 years ago

    Hi Terri

    A lot of the tomato gurus at the tomato forum use the concrete reinforce wire to make their own cages, if you google you can find a lot of videos on how to make it.
    Other growers use the regular tomato cages using 2 and one inverted.
    You can also use strong bamboo sticks or wooden stakes, 3 would make a teppee.
    The Texas tomato cages probably work very good but are pricy.

    Silvia

  • 15 years ago

    Thanks Silvia - I didn't even realize there was a Tomato forum. Going looking now.

    Terri

  • 15 years ago

    I use the concrete reinforcing wire.It is a bit of a pain to work with when first cutting it,as it wants to constantly roll back up,but that is the only downside IMO.You can purchase an entire roll(so long as you are able to get it home)& some of the stores also sell it pre-cut.I use 6' lengths to make 2ft diameter cages for toms-it can be cut with a good pair of pliers & a bit of elbow grease.The cages are 6' high & I cut the bottom wire off,which then creates legs,that can be sunk into the ground for support.I make narrower cages for cukes & narrow/shorter cages for peppers.It can also be used to make a tunnel for row covers.Very useful stuff & worth the money,as it will last for ever.

  • 15 years ago

    I let mine grow naturally. I just put red mulch on the ground and let em' go...I have never had to prune, always get well over 15 lbs of fruit from each plant and they seem happy! (I know...I'm the weirdo, lol, but the only problem I've ever had is BER and I use something called Serenade (organic) on them once a month...keeps that away. Believe it or not, since I started just "letting them go", I haven't had insect problems either. (Maybe just blessed, but it's my favorite way to grow toms!)

  • 15 years ago

    Thanks for the responses westhamutd and deannac.

    I have considered a cage type affair, but I'm dealing with rectangular boxes and space is at a premium. This also eliminates the possibility of "natural" growth habit being allowed.

    Posts are going in the ground this week for "something". I am probably going to copy the local farmer with his post and twisted string arrangement.

    Thanks again to all, Terri

  • 15 years ago

    Terri,
    I hand fabricate a 'fishnet' out of nylon string, and suspend that from 2x2 Pressure Treated wooden frames by cutting a 2x4 lengthwise on my table saw. You can buy the 2x2's from Lowe's or Home Depot. I use deck screws to fasten it together.(no rust) I prefer the flexibility of the string netting over the solid wire. (a personal preference) As the plant grows I train it to weave up the netting.(it's easier to bend the string netting to the plant rather than bend the plant to solid wire netting) Using a flat netting instead of a round cage I can pick the fruit from either side.
    I also use the earthbox netting & aluminum frames they sell for the earthboxes but I modify them slightly for my use. Everybody has their own contraption they make work for themselves and whatever works for your garden is just fine.

    Lou

  • 15 years ago

    Hmm, rectangular boxes and premium space? Check this out; I'll link it below. It's for beans but I guess you could use it for tomatoes. Probably will take some manual work; and I'd use a heavier weigh jute for tomatoes than for beans.

    Of course, anything built from PVC catches my eye! Easy to store and to transport.

    ~dianne

    Here is a link that might be useful: Bean Trellis picture

  • 15 years ago

    Oh, nice picture! Looks quick and easy.

    ~dianne

    Here is a link that might be useful: Trellis

  • 15 years ago

    Thank you Lou & Dianne.

    I hope to get creative this weekend. Will post a pic when I get it done. I've waffled long enough and will be trying to make a twine outfit like Lou describes using electrical conduit and fittings. Hopefully, it will look a bit like Dianne's pic find only with cross-woven twine as well.

    The area is somewhat protected from the north wind but I know I need to have some strength to it for the rogue gusts.

    Thanks again to all for your input - very helpful!

    Terri

    Thanks again to all for the input.

  • 15 years ago

    Something I'm trying this yr.


    I have been using rebar and pvc to hold the cages up for yrs.


    But as we all know mators quickly over grow the top, im hopeing the extra 3ft and the round 3/4" pvc before they start to hang down helps with krimping the stems. The pvc across the top of the cages the old way does stop the cages from bending over.

    Still in the building stage.


    Dont know why date is wrong on camera, but pictures were just taken Tuesday.
    Plant em if you got em.
    Sam

  • 15 years ago

    Sam

    I absolutely love your set-up! Where did you get the colored cages?

  • 15 years ago

    I have several cages made from salvaged concrete reinforcement wire (approx. 5'H) & several made from the rolled fencing wire(approx. 4'H) you can find in most home improvement stores. I use the wire cone tomato cages inside these (i.e. plant, insert small cage, then place cylinder over cage) & tie or clip the tops of the cages to the cylinders. I also tie/wire a few scrap rebar pieces around the outside for extra support as the plants grow, to help keep them from tipping over. This might seem complicated, but once it's done, I do not have to keep tying the plants as they grow, just tuck stray branches inside every so often.

    My tomatoes are in the ground, BTW.

    I like the concrete reinforcement cylinders for indeterminates that can quickly overflow the shorter cages.

    I used bolt cutters to cut the concrete reinforcement wire - & gloves are helpful as well - that stuff is rusty & tough!

  • 15 years ago

    Lady Wingr. I use the post and twine approach. I place old chain link posts between every two plants and weave twine from one end to the other and back as the tomatoes grow. Just tuck in the branches. I bought one LARGE spool at HD for 12.00. Works great. Good access and open rows!

Sponsored