skip to main content
Software
Integrations
Mobile App
Expert Support
All-In-One Platform for Construction and Design
See Pricing
Schedule a Demo
Talk to Sales: (888) 316-4595
My builder uses Houzz Pro to plan the timeline and give detailed estimates and daily updates with photos of progress, and provide invoices at pre-agreed key points in the build. This made the whole experience much more efficient and stress-free.
Steve W.
Client of Cribbs Construction
Learn More
Ideas
Discussions
Houzz TV
Houzz Research
Sign In
Houzz Logo Print
Explore DiscussionsFeatured Home DiscussionsFeatured Garden Discussions
Growing under Lights
jedijfo1

Overdriven and HOT!

19 years ago

I just installed some overdriven 4 foot light fixtures (2 bulbs each). They are the standard Shoplights with SL15 ballasts from HD running 2 T8 bulbs.

There are 2 fixtures hanging from each level of a 6' high x 4' wide foot wire rack for a total of 4 fixtures (8 bulbs). They are space 4" above a thermometer and they are hot....I can only touch the bulbs for 5 secs or less so I would estimate the temperature at the surface of the bulb to be around 130F+. I have the long sides of the rack covered with mylar to keep the light out of an ajoining room.

The room temperature is 66, near the rack is 77 and under the lights (4") the tempeature is close to 88.

Is anyone else seeing this? I have some T8 bulbs down int he basement (60F) and they are slightly warm to the touch.

If I need forced air cooling, I may go back to the standard T8 non-overdriven fixtures.

Comments (5)

  • 19 years ago

    Sounds a little on the warm side but the temperature depends on a great many factors. Too hot to touch the tube is not unusual. Even the slightest air movement would cool them noticeably, although just a little air movement may just move the heat from the tubes to your plants, so make sure you have enough ventilation to keep the plants cool too!

    As for whether to stick with it, if you need more light and can't fit in more tubes then you'll have to overdrive. Or go to a different format like compact fluorescents or HID. But if you can fit more tubes in then you should probably do that. Overdriving uses more electricity, and produces more heat, than normal fluorescents producing the same amount of light, the only advantage is you need fewer tubes.

  • 19 years ago

    jedijfo1,

    I got your email but you didn't show up in the members list at that time (a jedijfo did), so I couldn't send you an email here in The GardenWeb. However, I think it's better to answer here anyway, where answers are subject to "peer review" and suggestions by others.

    I think the mylar sheets are the primary cause of your hot running. However, 130°F is about normal for an overdriven T8 at the surface. You drink coffee that is much hotter than that. And I seem to recall that a non-overdriven T8 is about 120°F on the surface.

    As shrubs_n_bulbs suggested, you need some ventilation, particularly in the confined space between the mylar reflecting sheets. I use open chrome wire shelves and I use small electric fans to provide an artificial breeze for my seedlings.

    If it's any consolation, your overdriving ballasts are actually running cooler because they are "loafing" driving a single tube instead of a pair.

    You might want to re-think the placement of the mylar sheets. Perhaps if you described your layout in more detail, we could suggest a better alternative than your present setup.

    MM

  • Related Professionals

    Tampa Landscape Architects & Landscape Designers · Tupelo Landscape Architects & Landscape Designers · Cherry Hill Landscape Architects & Landscape Designers · New Orleans Landscape Contractors · New Braunfels Landscape Contractors · Clarksburg Landscape Contractors · Omaha Landscape Contractors · Burlington Landscape Contractors · Las Vegas Landscape Contractors · Queens Landscape Contractors · Kansas City Tile and Stone Contractors · Winston-Salem Tile and Stone Contractors · Augusta Tile and Stone Contractors · Concord Tile and Stone Contractors · Napa Tile and Stone Contractors
  • 19 years ago

    Thanks for the advice. Also have a open wire wire chrome shelf from Lowes. about 6 feet high, 4 feet wide and 18" deep (4 shelves). I use the mylar sheets (actually 1/4" insulated mylar) to do 2 things:

    1.Reflect the light back onto the plants
    2. Prevent the light from the shelves from blinding us in the family room next door.
    The mylar only is on the long (4 foot sides). The bottom, top and sides of the rack are open.

    With 2 normal fixtures I get a rise of only about 8-10 degrees. When the room temp is 60, the surface 4 in below is
    about 68-70.. Seems alot better and I can touch the bulbs. Before the label on the reflector seems to be melting and caused a stink. I can always open the windows.. Plenty cold outside next to the rack...I hate to use more power. It is expensive here in the northeast

  • 19 years ago

    Those SL15 ballasts are also generating plenty of waste heat, and heating the lamp filaments the whole time.

    See my post here:

    http://forums.gardenweb.com/forums/lights/?28645

  • 19 years ago

    Oops!I meant here:
    http://forums.gardenweb.com/forums/load/lights/msg0213125528645.html

0
Sponsored