Software
Houzz Logo Print
snalpha11

CFL above Germinating Peppers?

15 years ago

I am attempting to germinate a few kinds of peppers. Is it recommended to provide top light to the germinating seeds? When I did, the humidity dropped inside the tray.

Comments (4)

  • 15 years ago

    Light is unnecessary for germination. Heat and consistent moisture is what gets your seeds to sprout. I can't remember the temps off the top of my head, but there are shloads of sites that list out the ideal germination temperature for many plants. The benefit to top lighting during germination is to raise the temperature inside your planter.

  • 15 years ago

    What hibris007 said.

    I find a constant 85F works best for germinating peppers.

    Bill

  • 15 years ago

    Yep, No light is needed for germination. Just some warmth and moisture.

    I think the pepper seeds will germinate in the range of 70 to 85 degrees or so. Closer to the 85 degree mark is best for faster progress. The seeds might germinate at the lower end of the scale and maybe a little lower but definetly will take more time. At around the 85 degree mark the seedlings will pop up much faster if you can create those conditions.

    Last year i started alot of seeds indoors in 96 cell starter flats just using ambient room temp., maybe 70 degrees, and it took maybe 10-14 days for the seedlings to start to pop up and more seeds even popped after 3 weeks.

    Some seedling trays i brought outside when the daytime temps warmed up and had the sunshine heat element also to help.

    I reccomend covering any seedling flats or trays with saran wrap to help seal the moisture in, and also gives it a bit of the greenhouse effect to help keep the heat in if your using the sun as a heat source and dont want air movement stripping the heat away.

    Only after the seedlings emerge and show them life giving leaves will light be needed to keep em alive and growing.

    Jim

  • 15 years ago

    10 gallon aquariums are my firend. :)
    This is how i started mine last year. Used egg crate racks (light diffusers for overhead fluorescent lighting)on top of some bulk pvc fittings. Placed the seed in small containers or rock wool cubes and added water. Covered with plastic wrap. The only heat source i used was from the lights, in this case from an 8x65 watt pc light i threw together out of spare parts and scrap wood.
    {{gwi:1139251}}

    {{gwi:1139253}}

    i might have started them too early, though. This is what they looked like on april 10th.

    {{gwi:1139255}}

Sponsored
Peabody Landscape Group
Average rating: 3.5 out of 5 stars8 Reviews
Columbus' Reliable Landscape Design & Contracting