Hi Markiz37!

My method is basically just a hybridized version of what George Mander does. I tried his method first, then played around to see if I could get better results. I'll try to civer it here again, but please feel free to ask questions if you do not understand. I actually emailed George about 5 times to get clarification of what he was doing before I started playing with different methods.

First and most important - get some coconut coir. This is the major difference between mine and Georges' method. I find coir to be the best rooting medium available. Once you have that, the rest is easy. You'll need the following;

Rubbermaid dishpan. Mine measures about 11"x 14"x 5". You'll place containers in here. Next, find some small containers. I use 2 3/4 inch by 6 inch deep containers. That would be 7 cent X 15.25 cent for the Alberta crowd. Next, go to a fabric store a get 1 meter of elastic, like you would get for clothing. It is usually white in color. Next, go to a hardware or paint store and grab a roll of 2 mil thick clear plastic. You'll also need a CHEAP florescent light fixture and bulbs while you are there. The fixtures are about $10 for a 4 foot type. They take two bulbs for each fixture. Again, cheap is good here. Last, you'll need rooting hormone. You might want to start out with what your local gardening center sells. I use Rhizopon AA#3 powder, but that can be expensive if you are just starting out.

Now you can make your cuttings. I like to really would the cuttings and then stick in hormone. There have been studies done showing that cuttings that are wounded root more easily than those that were just cut at 45 degree angle. After dipping in hormone, place in pot. When you are finished, place all containers in dishpan and spray leaves with water. Then cover with the 2 mil plastic. Use the elastic to keep plastic in place. A staple gun works well for this. Now place dishpan directly under the lights. I place as close to the lights as I can without actually touching the fixture. You can also use bottom heat, but keep the temp below 75 degrees (24 c). Leave alone for a few weeks, and then lift plastic and spray leaves. I usually start to see roots also now. Cover and check weekly.

Here is the link to the George mader site.

Here is a link that might be useful: George Mander Roses of Excellence