Software
Houzz Logo Print
iagarden

Staking, caging, etc

20 years ago

This is my first year at this, and I can already tell I'm going to love it when compared to gardening in containers or in the clay ground.

I've been reading all threads on trellising and staking. Right now, I'm trying to decide between using a mesh and rebar or the Wooden Cage method.

I plan to grow both indeterminate and determinate tomatoes. Also peppers. In my past experience the determinate tomatoes and peppers still needed a 4ft cage.

With two tomato plants of each, how do I handle the determinates with a mesh? Weave them through the mesh also?

It would seem that the Wooden Cage method offers the most flexibility where one can create any size or shape by just placing dowels and 2x2's where they need them. I guess the only problem is the cost.

Can anyone explain how they handled a variety of different plants that needed support of some kind?

Thanks.

Here is a link that might be useful: methods

Comments (2)

  • 20 years ago
    last modified: 11 years ago

    Your link to methods seems to be for commercial growers. I know when I did my row garden, I used to stake & cage the tomatoes spacing them 4ft each way. Each yr. toward the end of the season they would fall over due to the weight of all the fruit plus the high winds we get where I live. When beginning my 1st SFG I tried stakes but the soil was too soft to support them from the beginning.

    Last year using the SFG method I used Mel's suggestions from his book, modified to use what I had on hand. What I had were a bunch of 6ft. 1x1 tomato stakes I couldn't use in the soil. So I chose to screw them to the wood frame using 2 sheet rock screws with a 1x2 cross beams to support strings run down to each plant. I also used some 1x2's for uprights.

    Mel suggests twisting the plant around the string (wire or rope) each day or two. This is tedious but I was really surprised how well they held up even with the high winds we had last year. Esp. since my frames just sit on top of the ground, not anchored in any way. Towards the end of the season I got some 6ft. 2x2 from a friend which appeared to be 2x4's someone had cut down the middle and used in some sort of shipping crate.

    From that experience I learned that the 1x1 tomato stakes & the 1x2's tend to bow & warp. So this year I will try to make more 2x2's by either splitting 2x4's or screwing 1x2's together for uprights and use the 1x2's for cross beams. Mount the 1x2 cross piece so that the 2in part is perpendicular to the ground to lessen the warping, live & learn. On the 2x2's I drilled a hole for a carriage bolt (using a wing nut) using a sheet rock screw for the second screw. I was concerned that using 2 sheet rock screws they may snap off. However none did even on the tomato stakes so I may use 2 sheet rock screws this year since they are much less expensive.

    The below link shows both. In the first 2 pics I made a kind of goal post set-up adding another 4ft section to the top of a 6ft 2x2 in a manner where they could be folded up for storage. Upon completion I realized even if the tomatoes grew 10ft high, there is NO way I could reach them. So after they went over the cross piece I just let them grow back towards the ground. Problem solved.

    I grew 6 tomato plants in this frame along with 6 basil plants. The basil got crowded out but survived. The tomatoes did great, to my surprise. However, the tomatoes MUST be pruned. In my row garden days I NEVER pruned, that's why they needed 4ft minimum. But even with that I would grow a basil between each plant.

    The moral of the story is do NOT trellis any higher than you can reach. And using wood smaller than 2x2 is likely to warp. I found using wood, affordable, easy to build, and most of all, it worked. I found it easy to get around to harvest.

    Even with 4ft in the row garden it was difficult to get into the aisle to harvest. I had many more plants and still had room to plant more last year.

    If you have more money, you can use other materials. Hope this give you some ideas.
    Good Luck, whatever YOU choose.
    Gumby_CT

    Here is a link that might be useful: Gumby's Trellis Stakes.

  • 20 years ago
    last modified: 11 years ago

    This is my first year using SFG as well. I have had a garden for several years and make homemade salsa each year. As I read the SFG book, I wondered how I was going to support these bush type plants. I have a trellis for the vining tomatoes but needed a solution for the bush tomatoes.

    My final solution was to pound a piece of rebar into the ground in the center my 4x4 boxes before I filled them with the mix. I added my grid, then planted 6 plants, one plant per square around the rebar. I bought the small, round, standard tomato cages and cut the 'legs' down to 5 inches. I placed them in the loose soil and tied them to the rebar and to each other for support. (Obviously the soil would provide no support.)

    I have 2 boxes set up this way with 6 plants in each box. I also have a trellis on 2 sides of each box. One side is for 2 vining tomato plants and the other side is for 2 vining squash plants. So far so good... I am documenting the progress and will adjust next year as needed!

    This method is sure a lot more fun than the old way of gardening... not to mention much more attractive than my old garden space!

Sponsored