Software
Houzz Logo Print
livnlearn

Feedback on BlueStar/AmericanRange/Prestige

16 years ago

Hello All,

I'm looking for opinions/experiences/feedback on using BlueStar 36" 6 burner range top w/island trim - would a fireproof backsplash behind cooktop advised?

I'm also thinking to double stack American Range 30" wall ovens - Gas or electric advised in terms of use and energy conservation?

And a pyramid style Prestige venthood 1200CFM internal blowers w/baffle filters - would an external 1600CFM blower be more efficient and less noisy?

Also opinion on a good (yet not expensive) undercounter refrigerator for basic drinnks/sodas/beers

Thanks.

-LivNLearn

Comments (5)

  • 16 years ago

    I just posted on another thread that we have the 36" with island trim and for a few years just had painted wallboard behind it. We cook a lot, and use the back right high-powered burner a lot, and there was never any darkening much less burning of the wall. Heat rises strongly upwards, and you can put your hand close to the side of the burner and not get burned.

  • 16 years ago

    I have a BlueStar 36" range with Island trim. I do not believe a fireproof wall is necessary at all. This is the reason they moved the 22k burner to the front. I would also suggest looking at the BlueStar wall ovens. They can be stacked if you are looking for a double.

    1600cfm is too much and too loud!

    Good luck!

  • 16 years ago

    There used to be someone on the board who had (I'm forgetting exactly) some variety of non-fireproof backsplash behind island trim. I want to say it was a low rise to a bar behind the cooktop. It scorched pretty nicely.

    The installation manual says:

    "If the island trim option is used without the 6" clearance recommended, a non-combustible rear wall extending a minimum of 6" below the countertop must be used. In no cases will we accept responsibility for claims which may result from heat damage to a rear wall or counter, including cosmetic damage. It is the responsibility of the owner/end user to ensure that the material used in such applications is not only non-combustible, but is also truly heat resistant."

    I wouldn't take that lightly. Our backguard scorched from putting a big tamale steamer on the 22k burner. That or using a wok in back will throw out a lot of heat further away from the burner than you'd think.

  • 16 years ago

    Thanks for feedbacks. I'm a big wok and big pot user so just for clearance along the back wall, I think coming out 6" will be safer and offer a deeper countertop.

    I was considering the higher CFM in the range hood if the blower was mounted along the outside wall/roof line to lessen noise levels. Any suggestions to reach that goal of efficient function at lower decibels?

  • 16 years ago

    I have the Kobe CH-179. At the strongest it's 800 CFM. After having it for a while, I know it's strong enough most of the time; the distance and number of turns to get the air outside has a big influence on how well it works, and most of the time I only need it on high for a short period, and if I turn it on high for a minute or two before it's needed then I'm good. So that with the overall not-loudness of the Kobe is fine.

    Coming out 6" in my opinion is overkill. It's rare that I use a wok in one of the back burners - it's too hard to reach. I've had large stock pots on the back burner on high for long periods of time with no damage to the back wall.

    I think just having a wall covering that won't discolor from heat would be sufficient.

0