Software
Houzz Logo Print
pearl_manwani

Please help with tile edges

16 years ago

I am in the process of ordering bathroom tiles. The ones I like don't have a bullnose, and the tiles have just regular square edges. The tiles are half walls, so you can see the square edge. What are the alternatives for good edges for tiles? My contractor suggested polishing and color enhancing, or painting the same color as the tile, or putting metal strips. I am not sure how all of these would look. Any recommendations? Photos?

Comments (9)

  • 16 years ago

    I wouldn't polish or paint the edges, and although using the metal bullnose edges might work, I don't know that it'd make for a nice look as the finished edge to a wainscot (half tiled wall). What you might look into is using some kind of chair rail-- either ceramic, stone, or wood to finish off the top edge. AS for any other outside corners, then you might either go with the metal bullnose, or even miter the edges of the tiles so they meet together at the corner.

  • 16 years ago

    Agree with Bill. The metal strips work well, though I'm not a fan of them as they just don't appeal to me.

    I usually miter if required.

  • 16 years ago

    I thought I was the only crazyman up at this time of night! :-)

  • 16 years ago

    What style is your bathroom? I think Bill has a good idea. In our last bathroom we had a beadboard wainscot that we topped with a VERY simple chair rail we made out of two pieces of painted poplar. There was a ~ 2"H x 3/4" deep band, and then a sort of "sill" on top of that which stuck out about 1.5" around most of the room, and about 3" on the sink wall so we could rest items on it like a little shelf. We gave it an eased edge and painted it white.... very clean and simple. Sounds like something like that might work in your situation.

  • 16 years ago

    Thanks everyone for your comments. I just realized that one of my tile choices has a bullnose - will that work?
    For the other tile, I don't like the look of chair rails - they don't look very contemporary. I am doing a very contemporary bathroom - what are the other options? What is a miter?
    Can you post photos?

  • 16 years ago

    I don't think I have any close-ups of a mitered edge, but it's basically the edge of the tile cut back on a 45 degree angle, so it can meet up with another tile, also mitered, coming around a 90 degree corner.

  • 16 years ago

    What about the edge of a glass tile? We're planning on glass white subway tile for a transitional bathroom. But there's no pencil - I fear that stainless trim will be too contemporary.

  • 16 years ago

    If you're doing white glass, what about a white ceramic chair rail? Either that, or a gloss white painted wood trim?

    Or, you could do the same thing as staceyneil did with her white glass, and let the top edge of the glass be your finish. It's a little easier with glass than ceramic, being that the edge of the glass shows as finished, where the edge of ceramic tile doesn't.