Software
Houzz Logo Print
brusso_gw

Installing Delta trim kit for Shower/Bath

18 years ago

I am remodeling my bath and in the process am updating the shower/Tub fixtures with a Delta trim kit. The original colors were gold and the new trimkit is brushed nickel.

I discovered that the kit does not have a diverter valve that goes through the face plate. But, the faceplate does have a knockout for one. Instead, it has a diverter valve on the tub spout. No big deal, I thought, I will just remove the gold diverter valve and screw a plug into it. that's when the problem started. I got a 1/2 inch plug from HD, wrapped it in teflon tape and screwed it in. Leaks like crazy. More tape, then some epoxy but to no avail. Back to HD. this time the REAL plumber guy who works there told me that the threads are not the same. So, I want to use a diverter but DELTA does not sell a brushed nickel diverter for some reason. I replaced the gold diverter but it now leaks too. I must have messed up the threads when I put in the plug. How is best way to plug up this hole?