Software
Houzz Logo Print
gardenerbabe

Onyx custom shower enclosure

18 years ago

First time posting here, but have been reading and learning for some time now. We are looking into the onyx shower enclosure (wall panels and pan). It has been suggested that we go with a standard 48 X 48 pan with bench behind it to fill our 48 x 60 shower enclosure. Entrance will be on the small 48 side. Should we be concerned with the bench being next to the pan and not inside. It has lips and will be connected with the silicone they provide. How does the cost & care of Onyx compare to Swanstone and other solid surface shower enclosures. Thanks in advance for your sharing.

Bonnie

Comments (14)

  • 18 years ago

    We will be having to order soon. Can anyone give some insight?
    Thanks

  • 18 years ago

    I think if your shower will use Kerdi or a similar system, it will be fine: the waterproof barrier will overlap the pan.

    Other methods may work, I'm not sure.

    An Onyx shower sounds wonderful: sure hope you post some pictures when its done!

  • 18 years ago

    Thanks for the post oruboris. The contractor, plumber, and builder were not familiar with the Onyx. I believe it is installed the same way that cultured marble is. The Onyx people say it can be installed on drywall and is designed for the DIY, so I believe the builder will be able to do the installation. I will have them put up the hardi back and use Redguard(SP?) as well. No one here has heard of Kerdi. If anyone can shed more light on this, I sure would appreciate it.

  • 18 years ago

    Is this a "faux" onyx that is cast similarly to cultured marble?

  • 18 years ago

    To answer the original question, I don't think you should be any more concerned with having the bench butt up to the pan than you should having the walls butt up to the pan. Basically the front of the bench is just a short wall. In fact, I detailed my shower the same way although I used tile walls on top of durock that has been waterproofed with kerdi. I just treated the front of the bench as a short wall with a bend in it and waterproofed the whole thing. Assuming that their product is waterproof at the seams you should have no more problem with the bench than anywhere else.

  • 18 years ago

    It is the Onyx Collection of custom showers. Check out their web site

    How about a link?

  • 18 years ago

    Here ya go.

    Here is a link that might be useful: The Onyx Collection

  • 18 years ago

    Oh, I was thinking of onyx tiles: I don't think you'd need kerdi with a system like this.

    Lisa expressed it well: butting the pan to the bench is no different than butting to a wall. Just remember that the bench front and top need to be water tight [and the seat sloped] so that water runs into the pan.

    Pay extra attention to the sealing of edges and corners.

  • 18 years ago

    Many thanks to you all.

  • 18 years ago

    first time posting here, but i read your questions re: Oynx shower. we have just built a new home and used the oynx collection in both our bathrooms. we used for a shower with a custom seat, built behind the base, and a stall shower in our master, we also used the oynx, for our sink tops... it is a beautiful material, very very costly, while installing, the shower walls, one wall did crack, it was behind the seat, so it was repairable, but being DIY'ers we took blame... this material cleans wonderfully and is beautiful, but just be very careful with the panel walls... hope this helps!

  • 18 years ago

    The Onyx showers look great, but I hope you're not right about no tiles and grout in southeast Louisiana. I'm in the middle of installing a new shower out of marble tiles and I live in New Orleans! Good luck! It's nice to see someone else in Louisiana posting!

  • 18 years ago

    WOW! Thanks for all the new posts. We are not DIY'ers and how I envy all of you who are on this site. I enjoy reading and learning and am always impressed your knowledge. I love the pictures and have kept up with many of your ongoing and past projects. Who knows, one day I may just get to be a DIY'er. I have changed my mind to doing the shower enclosure in cultured marble. I have seen it in some of the new and high end houses being built here. It looks really good since they now have the type without the obvious swirls. Someone told me that the product has improved over the years and that it is a shame some designer out there decided that it was not in style anymore. I'll leave that up to the them. It was so good looking and will be easy to keep clean in the shower. I would never have another tub or sink made from that. We have soft well water with a high mineral count. The shower will be easier to sqeegie. We're going with biscuit color, chrome Delta Innovations hand held on a bar and a fixed head as well. The Kohler 66" X 36"cast iron Tea for Two (also in biscuit) will have the Delta 4 hole Orleans bath faucets and hand held. The lavatory sinks will be the Kohler Archer with lavatory Delta Orleans in Chrome as well. Going with the Kohler comfort height and elongated Cimmeron toilet. So all fixtures will be in biscuit and all faucets will be in Chrome. I'm hoping for a timeless design here. I was encouraged by some old postings regarding the long time use of the Tea for Two even as people got up in age. I am now trying to decide between cultured marble tub deck, skirt, vanity tops with tile back splashes to link it to the tile floor. Or I could go with rectified travetine or porcelain tiles with a semi dark grount on all of the above surfaces. Again with the humidity here I am concerned about cleaning mold from grout. I know I will have to from the silicone caulk in the shower, but that is not as overwhelming as tile and grout. Jagl knows how it is here. The tiles I am looking at are a light cream and look very much like limestone. They go very well with the biscuit Kohler fixtures and the biscuit culture marble. Any further insight is indeed welcomed. Behind shower will be treated wood, cement board and redgaurd.

  • 18 years ago

    Hello Everyone,

    Having served seniors and people with disabilities for over 27 years, I can honestly say it's difficult to find highend quality products that don't have three pages of stipulations to thwart any reasonable chance of compensation when products fail. For over 5 years now I have been installing the Onyx Collection products in all my specialty additions and the feedback has been tremendous from my clients.
    From the ease of cleaning to the durability and non slip issues, my clients have only reinforced my decision to install a product that not only meets their specific needs in everyway but also gives me some peace on mind that I don't have to deal with some manufacturer over warranty issues should something fail.
    I commend all of you who are considering the Onyx Collection as a supplier for your current and future bath needs.
    As the premier Onyx Collection Distributor here in New York, my goal is to continue serving my community with the best possible products and service at the most reasonable price that not only increases the value of their property, but gives us all peace of mind that we've made the right choice.
    Thank you,
    Douglas E. Liszka
    President
    LOS GROUP Inc.
    Rochester, New York