Software
Houzz Logo Print
faleash

Should I get a duct silencer??

17 years ago

I've seen some postings mentioning duct silencers and have tried to search online to find out what this really means and can't seem to quite get there. I am getting the Dacor Renaissance 5 burner and the Dacor downdraft with an 1000 cfm remote external blower that will be mounted about 16 feet from my cooktop. Ducting will run down from the bottom of the vent to my crawlspace then over to my outside wall. Should I ask for a duct silencer and what exactly is this?? Thanks so much... PS, if anyone wants to comment on the Dacor... awesome!

Comments (4)

  • 17 years ago

    I'm a big silencer fan, but am not able to comment at all on the effects on a downdraft installation. That strikes me as very different from a conventional hood install. Perhaps someone with a similar downdraft installation could comment on the use of a silencer, though I've never heard of anyone with a downdraft using a silencer.

    FWIW: the only silencer I'm aware of is the Fantech LD series. These are BIG (the LD10 I have is 36'' long and 14'' in diameter--a big trash can-sized cylinder). Fantech claims up to 50% reduction in perceived noise. I love ours. Again, can't speak to your install.

  • 17 years ago

    thanks for your response. BTW, do you know why I never seem to get responses in my email even tho I check the box requesting that??

  • 17 years ago

    I would also like to hear from someone who has used a silencer on a downdraft. I will soon have a 600cfm inline blower with 6" ducting (Bosch 15" tall 36" wide downdraft) going down into crawlspace and out the foundation, about a 6-7 ft span. Would the silencer do anything for sound dampening? Would I just be wasting my money?

  • 17 years ago

    Downdraft schemes attempt to divert the upward flowing cooking effluent to transverse motion and then down motion. This is difficult and only marginally successful at best. The duct sizes that are typically used are often too small to pull large volumes of air through. No matter what capability the blower is claimed to have, it is rated at zero inches of water static pressure and with a constrictive duct and filter on the downdraft entry, the pressure loss will be significant. As a result, the flow will be significantly reduced from the spec.

    Some capture improvement might be achieved if the cooking surface has cabinets over it and a wall behind it. Placed in an island configuration, a downdraft system will have even more trouble than normal hood systems in capturing the effluent. Sorry.

    I expect that the noise will result from several sources, and a silencer, even if it can be fitted into the usual downdraft ducting, will only silence the external blower, and not the noise from the filter and transitions in the vicinity of the cooktop.

    kas