Software
Houzz Logo Print
msmagoo

Transition from carpet to tile?

18 years ago

I've also posted this on the kitchens forum. DH just laid tile in our masterbath area. The rest of the room has carpet, what kind of transition do we use when it meets the tile. The rest of the house has those gawdy gold metal pieces, which I hate. Please does anyone know if there are other options?

Thanks,

Magoo

Comments (9)

  • 18 years ago

    You should be able to find a stone threshold at HomeDepot. They come in neutral colors and about 42 inches long, 2 inches wide. Cut and install just like tile. Tile stores have them too.

  • 18 years ago

    We have stone or marble threshholds transitioning from all of the tiled bathrooms into the carpeted bedrooms. As posted above they come in a couple of different lengths, can be cut and installed like tile.

    Amy

  • 18 years ago

    There are many transitional moulding types but another avenue if you want the look of carpet to tile w/ no transition moulding is to have a z-bar strip wher the carpet is rolled over and attached to the z and bumps up to the tile. Clean transition and look.

  • 18 years ago

    Corian-like material is what I've typically used. Big boxes and flooring stores carry it. It is easy to install and can be cut with a power miter saw. It usually has one lip with a beveled edge. If you don't want the beveled edged due to the heights between floors, simply turn the piece upside down and use the flat surface as the top instead.

  • 18 years ago

    It depends on where the change occurs and what the height difference is.

  • 18 years ago

    If you use a stone threshold, HD and Lowes usually only have one or two colors. Our (major) tile supplier had four colors. Our tile guy had one specially made to match our light colored cork floor to transition to the hall tile. The color matches almost exactly.

    Anne

  • 18 years ago

    A threshold is at an exterior door to stop weather penetration. A saddle is at an interior door to provide a larger door undercut for area rug clearance. A strip between two flooring materials is called a reducer strip wherever it occurs.

    The number of possibilities for the location and the difference between the two materials makes the question impossible to answer without making wild guesses

  • 18 years ago

    Sorry it has taken me so long to respond. We just finished the tile this weekend. The area between the tile & carpet is about the same height, but there is a gap between where the tile starts and where the carpet ends. I really like the idea of the metal that pulls the carpet so that there is hardly anything showing, but the tile place just told us to use one of those metal strips.

  • 18 years ago

    Any floor covering outfit that has or contracts out to carpet installers carry the z-bar strips but you should have it done by a carpet/floor covering sub as they will stretch the carpet, roll it over and tuck and trim so it will be seamless. It shouldn't cost too much for a pro to do this.