Software
Houzz Logo Print
pggirl_gw

Kitchenaid Vent hood help needed!!!

15 years ago

Okay, know this is not one of super expensive pro deals that seems to be the norm, but was what we could afford and pushed our budget even at that.

Anyway, here is the question that I hope someone will know the answer on and be able to help.

Vent hood is a KWCU360JSS1. This is a 36 inch hood that uses three baffles to filter the smoke, grease etc. before it is transported straight up and out the roof. Mounted over a 36" gas DCS.

Have been washing the baffles in the dishwasher once a week.

The issue is that the internal motor (tube looking mounted sideways in the top of the vent hood) is still collecting grease vapor. I have a layer of grease on the squirrel cage looking fan on either side, coating the black plastic slotted flat fan cover that is mounted on either side over the hole to the fans and dripping from each end (one drip currently on either end of the motor housing).

Biggest concern is the grease getting into the motor area being dangerous. Second concern is that the grease has a bit of an odor that you can smell close to the vent.

I've put my head up inside the vent housing itself and don't have any grease anywhere else so it is in the motor itself.

Questions: Is there a way to prevent this?

Is there a way to get rid of the odor (clean I know, but looks like the motor would have to be completely removed and taken apart to me)?

Here is an important one for any appliance/repair experts out there............

On each end of the motor is a black plastic slotted plate. This plate is flat and covers the hole on each end where each of the fans suck air in. Each one of these plates has three pegs sticking straight out of them. The pegs (for want of a better description) are slotted, being open at one end and closed on the other. Looks as if some sort of screen or other secondary filter is designed to mount to the plate by pushing on over the plastic plate and twisting to retain it in place.

Factory schematic and Kitchenaid chat have no secondary filter/screen listed to go here.

So, anyone know of perhaps another vent motor in the appliance family that has filters mounted on? Older model perhaps? Looking at it there is no reason to have these slot type mounts extending out from the plastic pieces unless they were to mount some sort of extra grease protection/filter on them. You cannot turn the plates with the pegs pointing into the motor as they will not mount (no provision for the pegs on the motor housing metal).

I'll try and get some picture up if that will help.

Need help badly with this. Anyone?

Comments (6)

  • 15 years ago

    Hope these pictures work. One picture should be the motor pictured on the left end that still has the black plastic plate on it over the hole for the fan. The other picture should show the right side where I've removed the plate. The next ones should show the plate that I removed and hopefully you are able to see the three peg deals that have the slots on them as if they hold a secondary grease filter of some sort to keep the grease out of the motor. Any help appreciated. I'm hoping that some appliance repair/parts people/other owners may be able to chime in with a filter of some sorts that fits this. As mentioned previous the factory parts schematic shows nothing, but the plastic plates and Kitchenaid chat gave me the same schematic. HELP!
    Oh, should be a picture of the label under the motor that talks about 'clean or replace fan filter'! None from new and none picture in schematics.
    {{gwi:1404015}}
    {{gwi:1404016}}
    {{gwi:1404017}}
    {{gwi:1404018}}
    {{gwi:1404019}}

  • 15 years ago

    Don't see an edit right off so I guess you have to add to the post.

    I certainly hope someone can help with the above questions. I've got the vent apart and needing to know what can be done about the secondary filter etc. as questioned above.

    Reading the owners manual is says to clean the fans. No where in the instructions I have does it tell you how your supposed to do this. Anyone have a safe way to do it? Don't want to blow out the motor or have a dangerous situation with it. Taking the plastic bits off gets you into the fan area, but a bugger to get anything in or do anything and I'm sure you don't want to be squirting liquid cleaners or having stuff pool in the housing while cleaning............

    Still need the help on previous posts above, but would love to know this as something will need to be done with it.

  • 15 years ago

    Anyone?

  • 15 years ago

    Seems like with that hood/fan design you will get the grease in the fan housing. Grease will most definitely get past the baffles. The fan housing would need to be disassembeled to clean it. I do not understand the design if there no way to do that. You could try fitting a mesh filter over the fan intake but that will affect cfm and may have other detrimental effects as well. Don't know what to tell you sorry..

  • 15 years ago

    "clean or replace fan filter"

    Seems to me that the manufacturer had some sort of filter in mind that must have escaped the parts list. But I can't imagine a filter that would be effective over that small hole without seriously reducing the flow rate.

    I think this shows one advantage of roof top exhaust blowers when constructed in a manner that shields the fan motor from the greasy exhaust flow.

    Anyway, my guess is that one has to remove the assembly, perhaps at the screws shown on the hood reinforcement in the first image. Just what access is available after that is unclear.

    kas

  • 15 years ago

    Thanks for the posts. Yes, I was thinking that some sort of secondary filter, maybe a really open foam or some sort of deal was made to go on there. Especially after it says that on the sticker about cleaning the filter. Nothing according to KA. I've cleaned what I can, but not got into the fan blades or if there is anything slung inside the housing.

    There are no instructions in the manual about how to get in and clean it. By my looking I wondered about taking the screws out of the side and that bracket piece in the first picture, but then I'm unsure if the whole motor assembly would try to drop out!

    Flow wise I was just wondering if there was something like those foam filters they have for cars. Really an open type foam with large holes in it. Flows with little restriction, but would make the grease stay on it rather than go in the blower. Would probably have to clean the filters often as I do the baffles, but no one seems to know of any or any old part numbers etc. for older lines or alternate lines so far.

    Would have loved to have a roof top blower or perhaps a better grade vent, but just did not have the funds to do it. Saw blowers for about $1000 and then would have to buy the stainless vent housing, pipe etc. etc. Looked way over my budget. Got this one on clearance as they had a new model coming out. Don't remember what I paid, but seems like it was right at $900-1000 all done.

    Thanks for the posts. I'm going to try KA tech again and see if they have any suggestions (beyond pay a service person to come out and deal with it) on how the fans are supposed to be cleaned and some sort of secondary grease retainer.

    Thanks again for the posts. Any other info or suggestions still welcome!