Software
Houzz Logo Print
kelynkelyn

Rounded corners on drywall around windows

18 years ago

We met with a designer/decorator who is part of our custom build package and she was wonderful. I didn't know what I didn't know. She is working for us and will be a valuable advocate with the builder. In Texas, it is common to omit framing around windows and many homes are built with a bullnose corner around windows. It looks very nice. The problem is if we decide to do plantation shutters, the fit isn't as good as if the windows were standard right angles.

We have a wall of windows in great room and breakfast/dining which will not be covered. The designer said she would definitely leave this bullnose. Anyone else have some windows standard and some rounded bullnose?

Comments (16)

  • 18 years ago

    I haven't noticed both styles in one house before (never thought to look for it), but the bullnose is very popular here and I think it looks great. In fact, we are doing that in our home. Obviously, I don't think it looks cheap and cold. I don't see why you couldn't do both.

  • 18 years ago

    I have seen both styles. It's just a personal preference. Most of the homes here have rounded corners, but some people like the angled corners on windows.

  • 18 years ago

    I have rounded corners on all my windows. It's a Southwest thing, and doesn't look at all cheap, cold, and motelish to me. On the contrary, I quite like the clean, simple lines which are more appropriate Southwest and West coast architecture and design.

    2x6 framing will give you a little more depth for doing shutters, although you might want to talk to the shutter store people to get their input on what would work best.

  • 18 years ago

    Even on a 2x4 wall, it shouldn't affect the shutter install as you are only talking about a 3/8" difference lost w/ the bullnose. Not experienced w/ shutters, i would think it would be dependent on the shutter itself along w/ window type as far as openers, hardware interference.

    We are wrapping bullnose into the opening, but it will butt up to a smaller framed opening the windows are installed in that have a pine sash/jamb,casing. I agree w/ cheifneil that it is a nice look as it's common out here in the mojave desert. Looks especially nice w/ a skip trowel/old world finish on the wallboard. I also like the look of bullnose wrapping into door openings w/ no door casing. We are going that route as well.

  • 18 years ago

    Before you do some with bullnose and some with square, consider that you may choose to change your mind about the window dressings at some point...

    Done correctly, shutters can be fitted to bullnose-wrapped windows just as nicely as square.

    Also, sometimes things can get lost in translation with the drywall crew (or any sub for that matter). It may be easier in the long run to choose one style or the other for the entire house.

  • 18 years ago

    Thanks, everyone. I did talk to our shutter guy and he said he can frame around bullnose and has plenty of examples in nearby neighborhood.

  • 18 years ago

    Boy, I need to hang out in cheap motels more often. I would not have chosen to use the bullnose on all my windows had I known.

    ;>D

  • 18 years ago

    Hi, Anyone have a picture (photo) of the bullnose around the windows. Going to be drywalling in about a month and
    would like to see what it looks like finished . Never see it up here in B.C.

  • 18 years ago

    I just took a couple for you. There are different radius bullnose available. My previous house had a small radius, maybe 1/2". This house has what looks like 1.5" or so.

    This is with a window treatment.

    Here's a closer look at a plain one with no window treatment. The large radius bullnose probably wouldn't have been possible without the 2x6 framing on my exterior walls.

  • 18 years ago

    If you want, you can still install window shutters on windows with rounded drywall frame either by using rear hang strips if you have enough window frame depth or by simply installing the shutters just outside the window frame using hang strips.

    I attached a link to where you can find mounting and measuring instructions when mounting either to inside or outside the window frame.

    You also may want to check out: www.horizonshutters.com

    Here is a link that might be useful: ShutterLand

  • 9 years ago

    I like the negative comments as well as the positive. It's hard to deal with negative comments in person, but online you neither have to politely agree or disagree. I am moving into a home with this type of drywall and just learned it's called bullnose. Just on the windows, the doors have trim. I am used to trim. The previous owners have mini blinds that have really scratched up the drywall. That is why I have ended up on this thread. There are walls of windows with too many blinds to deal with. My return is about 4 inches and have considered painting the return a white trim color to help set them off, and help the height of the windows match the height of the trimmed doors.


    I am learning to just appreciate whatever is there and not worry about such things, but that is different when you are building. The negative comments help you see the pros and cons before making decisions. I think if I were building I would go with a white trim to set off the wall cover. I have noticed the windows in Arizona are smaller due to the heat than up north, where large windows look more finished with trim.

    i however have large windows, no trim. It does appear to me to be a cost cutting measure of the original builder.





  • 9 years ago

    Correct - not having trim is cheaper. Not having to have your drywall crew skilled enough to do a crisp right angle is cheaper. The bullnose bridges the 3 pieces of drywall and does so with a plastic strip. It is not as durable as a metal corner, which is what you use for a non-wood framed window return.

    Sometimes this is done for aesthetic reasons, but most often, it is done for cost savings - it's a lot easier to get a decent look with this method.

  • 9 years ago

    We're having a home built as well and were totally surprised that no trim is provided on the windows. (Pennsylvania). The upgrade cost, of course, is crazy high. My immediate thought was we'd have to get the trim. I grew up with trim, every house I was familiar with had trim.

    We re-looked at model homes from the builder ... turns out some had trim, some not. We simply had not noticed. We like the "modern" look with no trim. Seems modern/contemporary to us versus the traditional colonial trim we are otherwise familiar with.

    Will have to check out a motel some time.

    -Rob
    www.ahomefromscratch.com

  • 9 years ago

    I guess it's all what you are used to. I was quite interested to see the pictures with no trim - I don't believe I have ever seen a home with no trim. I HAVE seen motels with no trim.

    I'd have to go with trim, because that's what I'm used to.

  • 9 years ago

    I recently moved to a house with all bullnose windows. They are over 25 years old. My issue is they forget very dusty and do not clean as well as painted trim. Also, I have many cracks where the drywall meets the wood window frame. I was left no paint so caulking and repainting becomes a major project.