Software
Houzz Logo Print
johnfrwhipple_gw

Installing a mirror in a shower - Two Way

16 years ago

I am working on this incredible project in Yale Town and we have installed a two way mirror in the bathroom. The back side opening up into the master bedroom walk in closet. I know this sounds bad up to this point but wait.

I constructed the back side of the mirror out of 1/2" Marine grade Ply which got install with a cut out that holds a small computer monitor in the portrait position. This ply was sprayed pure black before the mirror was installed.

The monitor plays videos of rain, waterfalls, streams, storms and poems about water in both English and German. It is amazing! There is a speaker as well that does the sound track. I can't wait to see the storm video with the shower lights dimmed orange. Wow!

When the monitor is off the mirror looks normal. I have design some vanity lighting that I think you will all like.

This job got me to thinking you could install a two way mirror to conceal one of those digital LCD picture frames. If the mirror was sized double you would always have a mirror on sight and that's handy for brushing your teeth and shaving.

And you can see your kids - multi task when you come home at 11:00 PM and the whole family unit is in bed.

How would you guys pull this off. No steam shower and the mirror is not in direct contact with water or body spray. Off to the side.

I would like the mirror to be framed with a Chair rail like profile and I think we will be setting a marble or marble like 1"x1" tile. This shower will be built with either the CeraLine channel drain or the Quick Drain USA channel. I'm torn over which one.

I think this is a neat idea and I have a short 3' wall to build it in. I want to have two body jets below this mirror and a bench to the back. A second recessed niche to the left for shampoo, soap, razor and scrubber.

I'm thinking like setting the mirror like a box lid and building my framing so I have a 1" over lap of tile. Perhaps Kerdi fix along this edge to set the small tiles. If the mirror was set with kerdi Fix and the box was dadoed and covered with Kerdi or Hydro Ban it should be bullet proof.

Any thoughts?

JW

Comments (7)

  • 16 years ago

    Strange as it may seem to some people, others enjoy reading more "stream of consciousness" writing, even on practical topics like this.

    Thanks, John. Sound like an interesting project. The kind of thing that spurs creativity. Why did the homeowner decide on that placement of the mirror? Why the back of the closet? Is it transparent from the closet side?

  • 16 years ago

    A few night shots of the shower.

    {{gwi:1449451}}

    {{gwi:1449452}}

    {{gwi:1388642}}

    {{gwi:1409347}}

    You can notice in the last shot that the drain is not finished being installed. My spacers just came with my Two new channel drains!

    I prefer the size of this Quick Drain USA Channel drain but I like the fine tuning of the CeraLine drain better for fine tuning. It is a tough choice to make between these two world class drains.

  • 16 years ago

    We where surprised to find this extra cavity in the wall behind the vanity and the closet. The client/designer made a quick spec change and made this happen.

    This client speaks around the world and has seen some very state of the art technology and we have incorporated lots of this state of the art science into his bathroom renovation.

    The mirror is blocked off from the closet and one would have to remove the access panels and unscrew the TV from the backside before anyone could peek in and at that the viewing angle only reaches mid point of the drain.

    This mirror needs absolute darkness to work. We tapped off the TV power light so it would not shine through.

    Some how I screwed up the computer signal and there was too many remotes to make sense of anything. The client has since rebooted the software and I will get some choice video (HD) and pictures in a few days.

    I'll take some pictures of our glass windows that turn from frosted to clear in a touch of a switch. So cool...

    I bet I never build it's equal!

  • 16 years ago

    You can see the back side of the Roma steamer in the first picture. It is just that black metal plate.

    The wall mount Roma steamer was to fill this wall cavity but when we demoed we found the wall to be doubled up and it offered over 14" of inside measurements.

    The steamer unit blocks the view into the bathroom from the walk in closet. The TV drops in from the top through a 10" x 16" access panel and the TV needs to be dropped by your finger tips into a custom L bracket channel I designed that pins it tight at the bottom. With the access panel off you cansee the monitor clear as day. With help from the other side we slide it side to side until perfect.

    We are using a piece of scrap drywall to pin the TV at the top until I can mill a proper stop.

    The affect of the text is surreal. The client has written poetry in Caligraphy script and in German as well and because the software fades the pictures and text in - and because the monitor is a good 1 1/8" back from the back side of the mirror it has this "Ghost Like" appearance.

    The text fades in from deep violet and blue and slowly fades out bright orange and amber. So So Cool!

    You have never seen anything like it! - I've not, until now.

  • 16 years ago

    Almost unbelievable. I can only imagine the budget one would have to have for something this complex. Maybe in my next life....... no, probably not then either.

    I'd love to see pictures closer to the end of the project. I must admit I have some difficulty imagining the full effect. How often do you think the owner will use all of the options? It almost seems too much to handle for a rushing out of the house in the morning kind of shower.

  • 16 years ago

    The shower is restricted now and does not deliver enough water to feed these fixtures.

    I suspect the shower will be used mostly with the rain head and hand held.

    I measured some glass wrong and am waiting for a new order to wrap this puppy up. I should be able to finish sometime next week.