Software
Houzz Logo Print
caroline94535

I need help finding a vanity & countertop

18 years ago

We've almost decided on the plumber! Now I have vanity issues. Our small bathroom needs an 18" deep vanity; the standard 22" will not fit.

I'd like it to be 18"x48". I'd like the right hand side to be 24" wide with one door that opens to the right.

I'd like the left hand side to have two or three drawers. It can be 24" or 21" wide.

I want the sink to be centered over the right hand side, over the 24" area above the door. That would leave a larger counter top to the left of the sink.

I'd like the vanity to be black, and the counter and sink to be white. Or, the vanity could be white, with a black counter and white sink.

Does Swanstone make an off-center sink/counter in this size? Do you have any suggestions as to what would work?

I might be able to swing a granite top; but I'd prefere to save the money for the kitchen remodel.

Any ideas you can offer will be so appreciated!

Comments (5)

  • 18 years ago

    I had some off beat vanity needs to, went to Home Depot and ordered Kraftmaids from them. They can do about anything you like, including 18 inch widths.

    Downside it the 6 week wait time...

    For the top, you may have to buy a larger one and cut it down, or use tile.

  • 18 years ago

    I'm using granite leftover from my kitchen remodel for the bathroom vanity top -- sounds like you're doing it the other way around :) You can try going to local granite yards and ask to see their "boneyards" or granite scraps. I looked hard for shallow depth vanities, because my granite is only 20" high (deep), but they are few and far between and mostly designed for tiny powder rooms. For a 18" x 48", especially with the asymmetrical look that I think you're describing, you'll probably need to go custom-made.

  • 18 years ago

    You will need to order a custom vanity. Upside is that you can probably get what you want, for a price.

    Here's our 18x48" vanity, with a granite remnant countertop and undermount sink. This one is from Jenson Vanities and we're very pleased. I don't think they do the offset thing though...

    blurry view after the knobs were on, mirror installed, etc:


    Cindy

  • 18 years ago

    Cindy -- nice look! Do you recall approximate price for vanity top? Thanks.

  • 18 years ago

    We paid $750 for granite countertop, installed with 3" back and side-splashes, and a shelf for the niche (which you can't see in any picture). Vanity was about $700; I changed the knobs to polished nickel which added about $50.

    The issue if you want an undermount sink is how to fit the sink and faucets into the 18". We found a small sink (11-1/2x15-1/2 if I remember correctly) that was made to fit prefab granite countertops imported from China. There's no brand name on it; we found it at HD Supply one day when I was wandering the aisle while my husband was buying something else. I had my camera and tape measure with me and went home and figured out the measurements. (I had talked to the granite fabricator earlier and he told me my max dimensions.) By offsetting the single-hole faucet and soap dispenser, we were able to fit everything in.

    I'm using this bathroom right now while our master is in construction; the vanity top is not really roomy, but sufficient. It doesn't work for two-at-a-time though. This will be our guest bath.

    By the way, a small tape measure and digital camera are your shopping friends. I still refer to my digital product photos for reference. I was scolded at Lowe's once for taking pictures, but 95% of the stores and people were great. I learned to take pictures of the product, the box it came in, the price tag on the shelf, etc. Really helped a week later when trying to sort through things.