Software
Houzz Logo Print
monicakm1

Tile 'size' Question for Mongo

19 years ago

Mongo, my bathroom is 10'3" x 11. There is a 67" vanity, 63" closet, a 44" closet and the tub deck is 35ish". The tile I've chosen comes in 13", 20" and 10"x13". I'd love to use the 20" tile IF my room is large enough for it to look good. And, I'd like to run it on the diagonal. Fewer grout lines is my goal altho I know by running it on the diagonal I'll have more grout lines. Also, the walls will have the same tile up to chair rail height and I would like to use the 10x13. Does this sound aesthetically pleasing? I'm all "ears" if you have a different suggestion :)

Thanks,

Monica

Comments (5)

  • 19 years ago

    I'm not mongo but I think what you're proposing would look fine. I did a quickie sketch, it shows just a plain 10'3x11' room with the 20" tile on the diagonal and an 11' wide by 8' tall wall with the 10"x13" tile in a brick pattern, with a 4" high 1x1 glass mosaic starting at 3'-0", a 6" "base" and a 6" tall bullnose on top of the mosaic. It's at least a visual place to start.

  • 19 years ago

    I think it sounds just fine.

    I think the idea of running the floor on a diagonal to be an excellent one, it takes away the directional conflict of the floors vs the walls and resolves the possible conflict of floor and wall grout lines lining up or not lining up.

    I also much prefer a rectangular tile on walls instead of a square tile. To me it just flows better.

    Sounds like a good plan, and kwglisa's pics are an eye pleaser as well.

    Mongo

  • 19 years ago

    Thank you you both so very much :) kwglisa, the sketch looks great. Pretty much what I plan on doing. I think I'll be using a travertine chair rail on top of the glass tiles and a pencil rail on the bottom. I forgot to mention that the tub surround will also be tiled in the same tile. Since most of that application will be vertical, like the walls, should it be done in the 10x13 as well?
    DH is not a tile setter by trade altho he has done several jobs including our porcelain floors, travertine floors, granite countertops and travertine backsplash. His line of work is installing carpet and wood. He was balking at the idea of a warming mat under the tile. Then when I told him I wanted the 20" tiles, he said I could forget the warming mat. He's concerned with being able to make the floor level. Are his fears valid for someone that doesn't do this daily? He's very good at anything he does in construction (ok, he's NOT a plumber and it appears we can add locksmith to the list of what he's not) LOL
    Thanks again for your replies :)
    Monica

  • 19 years ago

    Monica our GC did everything in our bathroom except granite. He does tile routinely and did ours too, but he did tell us that it was more difficult to level 20 in. tile. So we chose 13 in. for the floor and it was fine. No lippage and it looks great! Since our closet doors (on the diagonal) are on both sides of the tub, I think the 13 in. ended up looking best.
    Susan ~

  • 19 years ago

    The key with lippage is to get the first tile level or flat. It's easy when setting a tile to set it ever-so-slightly out of level. The problem is those slight holidays build up over the course of the floor. So getting the first one level, then working off that one, will help prevent lippage.

    If you want the easiest installation, think about using self-leveling compound over the mat. It may add a bit of thinckness to the floor though.

    The SLC will give you a nice flat surface to thinset the large format tiles on.

    With larger tiles, you sometimes don't get full coverage with a 1/4" by 1/4" square notched trowel. If that happens, consider using a larger notched trowel and backbuttering the tiles before setting them.

    Mongo