Software
Houzz Logo Print
splats

Shower Heads - Disgusted?

12 years ago

I have been trying to find a HANDHELD shower head that PUTS OUT WATER in a full pattern. Not just a ring around the edge with some whimpy spray. I just spent $50 on a Delta I thought would work; but even after making all the holes as big as I could and removing whatever constrictor I could, still whimpy. I don't give a hoot about the 2.5gpm requirement, special massage sprays, etc. Can someone direct me to a shower head that , or one I can modify and will - drench me. I would even go with one of those double headed hand/wall shower heads if necessary. Can anybody help?

Comments (15)

  • 12 years ago

    I bought one at Lowes that has different spray settings, I just turn the outside ring of the shower heard and it has at least four different sprays. I don't know the name or number but I looked at a lot of them and they all had selections.

  • 12 years ago

    I found the perfect one when we stayed at the Four Seasons in Boston. It was by Waterworks, but unfortunately it was a model made for that hotel project and not available in their regular retail collection. I spoke to several people at Waterworks and the only way to get it would be to order several hundred!!

  • 12 years ago

    You are depressing me. Can't believe it is so damn hard to find a decent shower head. Reminds me of that Seinfeld episode where Kramer bought the showerhead on the black market

  • 12 years ago

    I've got 2 Moen's that both put out plenty of water, and not just in a ring. Go to a real plumbing supply show room and try a few out!

  • 12 years ago

    We went with this Symmons handheld and, because our other bath was torn apart, used it exclusively for about a month. We like the flow. We did replace the holder piece that connects to the wall with a traditional angled bracket because the one that comes with it shoots the water to the back wall. Caveat: we don't want or need a huge water flow to be happy in the shower. This isn't wimpy by any means, but it is 2.5 gpm. It's lots to get the shampoo out and feel good, but it's not Niagara Falls.

    Here is a link that might be useful: Symmons Ballna @Amazon

  • 12 years ago

    We have a combination of Symmons showerhead and Waterworks hand held in our shower. We just started using it Sunday but both have a pretty strong spray.

  • 12 years ago

    If you want something inexpensive, I have two suggestions. We got this Kohler shower head as a temporary fixture, but ended up liking it so we now have two - it comes in a handshower version. In our previous home, we got two Waterpik showerheads from Costco that were fantastic.

    Here is a link that might be useful: Kohler showerhead from Lowes

  • 12 years ago

    Grohe or Hansgrohe. I have the Hansgrohe Raindance S 150 AIR 3-Jet Handshower and it is wonderful. I am not sure how much they are now but I remember paying roughly $80 for them. I also have a Grohe Rainshower Cosmopolitan in another bathroom. Cost roughly $100 a few years ago. These shower pass the long hair test and everyone who has visited and used them in my bathroom went home and bought them too. Grohe and Hansgrohe have a huge selection of hand showers.

    Best of luck!

    Here is a link that might be useful: Grohe Hand Shower

  • 12 years ago

    Speakman.

  • 12 years ago

    well i solved my problem by modifying a Delta shower head i had. Removed the restrictor from the end of the wand and drilled out the small hole in the part that screws to wall. I now have a full powerful stream across the entire shower head face, hooray.

  • 12 years ago

    Nicely done, McGyver. :-)

  • 12 years ago

    McGyver indeed! I am currently using a secondary shower while our master bath is being remodeled ... I'll have to open up the handheld tomorrow and see if I can perform some of your McGyver surgery on it. We had a good shower head in our old master bath and I made sure to keep it in case the new one isn't as powerful.

  • 12 years ago

    Depending on the water pressure allowed by your shower valve, you can remove the restrictor, and o-rings, but leave the strainer in the shower head (to keep the stone bits from clogging the shower head holes ) to get the best pressure.

    Our newer shower valve (required in CA) is 2.5 gpm max. The one in our other bathroom (unremodeled) has water pressure that will knock your socks off.
    You can almost always modify the shower head, but the valve is where the flow is ultimately determined.
    -Babka

  • 9 years ago

    Babka, can you tell me what model you got?