Software
Houzz Logo Print
gbsim1

Tile drilling/widening advice please??!

18 years ago

After much labor, the plumber managed to get two holes drilled in the porcelain tile shower for the handshower bar. I was sweating bullets as he pushed, wrangled and torqued the drill around for what seemed like an eternity. It is a miracle that a tile didn't crack. Then when he was "through" he discovered that his drill bit (he only had one!) was too small and the holes wouldn't accept the screws that Hansgrohe provided. He was all set to start "wallering" (southern term) out the holes with the bit he had when I asked him to cease and desist and said that we'd handle it from there. That's the "royal" we as I really meant my husband!

So what type of drill bit should we use to safely make the preexisting holes larger in diameter? We aren't sure of the current size, but they need to be 6mm for the screw anchors. And any tips would be much appreciated.

Grace (the longest bathroom remodel in history is nearing completion!!)

Comments (8)