Software
Houzz Logo Print
sdlady_gw

Mosaic tile over Kerdi - are problems common?

18 years ago

Somewhere in the last 10 pages of the forum there were photos by someone who had unresolvable problems installing mosaic tiles on the ceiling and floor of a Kerdi shower (sorry, I tried to find them again and no luck).

Is this something that happens frequently? I have my heart set on mosaics on both the shower ceiling and floor and am wondering if they are going to be a headache if I do a Kerdi installation. I am still in the planning stages for a bathroom redo.

Comments (6)

  • 18 years ago

    I'm not sure about the thread you speak of, but I've never had a problem with it.

  • 18 years ago

    If I recall, someone's installer had difficulty installing small glass tiles over Kerdi. I'm not sure if that's the thread you're referring to.

    Any mosaic material; glass, porcelain, or natural stone tile, is an excellent candidate for going over Kerdi.

    Mongo

  • 18 years ago

    It's me you're thinking of. Four different tile guys could not figure out how to get the glass tile to stick, so I had tear it out and start over. Went with travertine instead. The Kerdi reps and the glass tile rep both confirmed after installation of Kerdi and after purchase of glass tiles that they were not a good combo. It was a very wasteful and irritating part of my build. I even bought samples of the glass tile and made my first tile guy tell me that he would have no problems with the installation before I purchase all of the glass tile. So much for his word.

    I purchased by glass tiles from Susan Joblan online. The tiles come with a clear paper face. When we went to pull the clear paper off the tiles, more than 50% of the tiles came with it. In other words, the tiles continued to stick to the paper instead of the wall. And this was waiting a full four weeks with the tiles on the wall before the paper was pulled off. Plenty of time to stick. If you decide to attempt the glass tiles over Kerdi, go with a different type of glass tile.

    Here is a link that might be useful: Glass Tile with Kerdi Post

  • 18 years ago

    That's the thread.

    I've had great luck using a lightly modified thinset for glass over Kerdi. Modified just enough for little extra bond, but not so much that it's too modified to get a full and timely cure.

    Mongo

  • 18 years ago

    Thank you all so much for your input! I am greatly relieved to hear there should not be a problem. The tiles I am planning to use are 1x1 glass blend (glossy & etched) on a 12x12 mesh backing.

    Soonermagic: I am so sorry for your trouble. I hope your travertine is a satisfactory substitute.

    Mongo: What is a "lightly modified" thinset for glass over Kerdi?

  • 18 years ago

    Versabond or it's equivalent would be lightly modified right out of the bag. Just add water.

    Or a dryset like MasterBlend with acrylic latex modifier added to it to be the equivalent of Versabond.

    Flexbond would be highly modified.

    Mongo