Software
Houzz Logo Print
tomdorr

Replacing AC unit -So Georgia

17 years ago

15 year old Heat pump/AC unit needs repl due to "pinholes in coils" per the repairman.

Any brands to avoid? Current one is a York.

Guy who repaired said he would give us an est for new unit, but did no inspection of house etc to determine heat load. Haven't rec'd that est yet.

Would the ductwork need replacing?

What all should be done when replacing outside condensing unit and inside air handler? Thermostat? Wiring?

this is a 1500 sf house w/ 8 ft ceilings and no added insul.

We plan to stay here another couple of years..no more than 5.

Comments (9)

  • 17 years ago

    does the existing system cool the house to your liking?
    if so just a straight swap of parts will be okay. If you think the system is too small ask the company to perform a heat load calc. i would get a couple estimates. If sizing needs to be changed the ductwork should be changed also. A new digital thermostat is always a good idea especially if you have a mercury bulb type now. Be sure to ask about the stimulus tax credit HP has to be 15 SEER and 8.5 HSPF and matching air handler
    Any brand should be ok except ICP or tempstar.

  • 17 years ago

    I genearally agree with the above, but I think ICP/Tempstar's upper-end of equipment is okay. For sizing a load calc "should" be done but few companies will. Did the old size unit do a good job cooling? Ductwork in many homes is inadequate and improperly sized from the beginning, so this definitely needs to be looked at whichever way you go. Carrier, Trane, Lennox, Rheem--they all heat/cool if installed properly. I would replace the thermostat with a Honeywell VisionPRO 8000 or "IAQ" which controls the humidity with a variable speed blower (ask dealer about this t-stat). Best thing to do is get a few estimates from good companies who will take the time to look at what your home needs.

  • 17 years ago

    tom

    what size are you replacing? how did it perform?

    these are the min specs one should look for in a new HP system.

    15 SEER, 12.5+ EER, 9 HSPF
    best rated matching var speed air handler
    full BTUs in both cooling and heating for rated size
    R-410a refrigerant
    new lineset preferred
    scroll compressor preferred
    electronic demand defrost preferred
    thermostat with "dehumidify on demand" feature
    staged backup heat strips

    The Fed Govt will offer up to a $1500 tax credit for qualifying systems the next two years. It would be a mistake to leave this on the table by not upgrading.

    my personal favorites are the following:

    Trane XL15i or sister mdl Am Std Heritage 15
    Carrier Performance 15 "H" mdl or sister mdl Bryant Preferred 15 "H" model.

    IMO
    Good Luck!

  • 17 years ago

    Thanks for the info.

    Is there as site that can cross reference Air Handler/Condensing unit serial numbers with the year made?

  • 17 years ago

    Most date production info is in the serial number. With Carrier for example xx03Exx would be 2003. If you post what you have we may be able to tell you.

  • 17 years ago

    Air Handler s/n: ENYS259949

  • 17 years ago

    Besides snagging "rebates" (i.e. YOUR tax $$) from Uncle Sugar, what are the reasons/odds that both indoor and outdoor units would fail at the same time?

    PS: You're in a HIGH humidity zone, so be careful to not get "oversized" by a zealous salesman, who does NOT know how to calc your load. You will wind up with a cool but muggy house, growing all kinds of mold, because unit will cool you down before moisture is removed.

  • 17 years ago

    Fixizn, it's standard pratice to replace both indoor and outdoor units of a heat pump when one goes bad, especially at >12 years old. Heat pumps must have matched components for best, reliable operation with a warranty.