Software
Houzz Logo Print
megradek

Rounded vs squared edge for SS sink?

17 years ago

Any opinions on this other than aesthetics? Is there any advantage to having either the rounded or 90 degree corners - like cleaning or something I'm not thinking about?? TIA!

We will have 3cm thick quartzite/granite counters. These are the 2 options I'm considering. Both are 18 gauge with same interior width (30") and length(17"):

Ticor - this one has a depth of 10"

{{!gwi}}

Kohler Sterling - this one has a depth of 9"

{{!gwi}}

This is my faucet:

Comments (12)

  • 17 years ago

    Well, the square sink gives you a little more room in the bowl but I personally think that the rounded bowl would look better with your faucet. I've attached a link to a 16 gauge stainless steel single bowl kitchen sink similar to the one you are looking at. 16 gauge is thicker than 18 gauge so this would be a better product and the price is really great! Good luck!

    Here is a link that might be useful: 16 gauge stainless steel kitchen sink

  • 17 years ago

    Thanks, kristas1923 for the link!! wow - that's a GREAT price for 16 gauge! Didn't think about space - thank you.

    I see what you mean about the curves looking nice with the faucet. The kitchen has a very 'rectangular' look to it with raised panels, big rectangular island (where the sink is located). but maybe the curves would add some softness to it.

  • 17 years ago

    Just an additional suggestion. One thing I like about your photo of the sink with what is called the "zero radius corners" is the drain location which is not directly in the center; that is called an "offset drain". An offset drain is located either toward the rear center, or rear right. The advantage is that you can set pans down without covering the drain. While an offset drain seems a minor point, it is actually very useful. You can find offset drains in various-shaped sinks; it is not just found in zero radius sinks. So if you prefer the rectangular bowl with the more rounded corners, you might search for one with an offset drain. Blanco has several (if you have the space, the BlancoPerforma Super Single sink is a nice shape and size).

    Here is a link that might be useful: BlancoPerforma Super Single SS Sink

  • 17 years ago

    From a function pt of view: it's much easier to clean out a rounded edge than a square edge.
    Our restaurants have square edges, but we also have those powerful rinsing faucets.

  • 17 years ago

    I was just thinking that the sharp corners might hang onto gunk more and need more cleaning. I also think of the harder edge as belonging to a very contemporary, almost industrial style kitchen. Your faucet is definitely NOT that style, so I assume that's not what you're going for with the rest of your kitchen.

    I agree about the drain location. Lots of sinks to choose from with offset drains.

  • 17 years ago

    I like the look of the square one better but agree with others that it would be more difficult to clean. I have to say, that it is all a matter of personal taste. The Kohler sink is a very standard sink... no personality there - maybe a sink doesn't need to have a personality. The zero radius has a personality, imo... says updated, fresh, modern. I went with something in between, it has a 15 cm radius, so easy to clean but more modern looking that the Kohler. It is by Elkay and is in their Avado family.

  • 17 years ago

    FWIW, I have a 0-radius sink and don't find it difficult to clean/keep clean at all. Maybe a few times a year (at most), after I clean the sink (which I do on a regular basis, BTW!), I'll take a cotton swab, spray some SS cleaner on it, and use it to clean any gunk that might be lurking in the very points of the corners. Usually there's very little there to wipe out, if anything.

    We love our sink!

  • 17 years ago

    I prefer the rounded edges with the faucet. If you can get 16 guage cheaper you should go for it but you won't see any difference in the performance of the sink between 18 and 16 guage.

  • 5 years ago

    We just had. Zero radius Blanco stainless steel double bowl 50/50 installed. The one problem we have is that all the water doesn’t completely drain. the store we purchased it from said that the manufacturer said that’s how the sink works. Does anyone have any thoughts on this?

  • PRO
    5 years ago

    Try coating the bottom with Stainless Steel Magic please.

  • 5 years ago
    last modified: 5 years ago

    I hate the squared edges. They just accumulate yuk. The rounded edges/bottom do NOT do that. Much easier to wipe and keep clean. I'm having a hard time finding them too. I will NEVER buy the squared edge/bottom sink. Oh and yes, I just read that someone noticed the water never seems to all go down the drain because they are flat. Whoever thought them up and why? Easier to manufacture is my guess. Bad idea.

Sponsored
Snider & Metcalf Interior Design, LTD
Average rating: 5 out of 5 stars25 Reviews
Leading Interior Designers in Columbus, Ohio & Ponte Vedra, Florida