Look for LED lamps of 13 or greater wattage. Is your base E12 or E14?

Thanks for the tip. I don't know what base I have. It says KT on it.

The glass globes on your fixture are probably short, limiting somewhat one of the options. In my area, Home Depot has the best selection of fan light globes. Dan's Fan City is not longer here but they offered a huge selection of fan parts.
Even though I suggested LEDs of 13 watts or greater, it is doubtful that they will be found with base of E12. if the globe length permits, adapters can be used to permit installation of E26/E27 lamps. An example is at the link-- you could search for others. Internet searching also will show how to determine if you have E12 or E14. If you do not have calipers, rather good ones with digital readout can be purchased at Harbor Freight with coupon for about $10.00.

Here is a link that might be useful: Adapters

There is a possibility that the light fixture is not integral to the fan and that a different light fixture could be installed on that particular fan. Something about that particular fan pleased you and prompted the purchase decision- unless it was a gift that you hesitated to decline.
The two candelabra base lamp limitation is quite significant.

This post was edited by bus_driver on Fri, Nov 21, 14 at 21:05