Software
Houzz Logo Print
suz1023

CL find for mstr bdrm coffee bar? quick--???

14 years ago

http://burlington.craigslist.org/fuo/2794562541.html

if i bought this i'd separate the two pieces, hanging the hutch top as an upper cabinet and install a tiny sink on the left side of the top of the bottom piece.

first

do you like the idea? will it look great or meh or worse?

second

are there sinks tiny enough to fit in the 16.5" top?

and if not can i remove the top and use a deeper countertop to achieve the depth it needs?

i want to go see it tomorrow---i like it a lot in the picture.

Comments (6)

  • 14 years ago

    shoot, i'm sorry the link isn't working.
    darn, i think i really like this piece!

  • 14 years ago

    the link works...

    Here is a link that might be useful: Antique French Style Hutch - $550 (Georgia, VT)

  • 14 years ago

    How tall are your ceilings? The top piece is 50 inches tall, more than 4 feet, and you will need a few inches above it for visual clearance for the broken pediment.

    You can certainly get a tiny bar sink that would work to fit in the bottom piece.

    Are you planning on refinishing it or painting it?

    Not my style, but honestly it seems like a lot of fussiness and wasted space, with no storage in the bottom piece for coffee supplies, etc. and a huge upper cabinet for ?

  • 14 years ago

    Take a yard stick and stand it up in front of you against a wall. The 30" height of the bottom is quite low for a sink base. Today 36" is called 'comfort height' for vanities and kitchen counters.

    I've made three bathroom vanities from antique chests or bureaus, and they average 35" high, while my kitchen cabinets are 36" high.

  • 14 years ago

    i think the cabinet is pretty and would look nice in a MBR...

    i would wonder about the height of the bottom piece too--- we have a very large desk area in our kitchen that is only 30" tall- i have a computer there and it's very comfortable to sit at and i have set up drinks there during parties-it's alittle low for that(i'm fairly tall-5'9"), but serviceable...
    i wouldn't want it in my kitchen work space, but for making coffee it might be ok. i had a tiny (11-12" square??) bar sink in a previous home which i did not like- but it had a very curved 'J' shaped faucet over it which might have part of the problem too... if you'll have a keurig type of machine there and won't be filling a big coffee pot there every day, a tiny sink might be fine.

  • 14 years ago

    the ceilings where i'd put this are close to ten feet--it's a cathedral ceiling.

    30" is pretty low, darn it. it will be next to the corner fireplace being built, which will have a raised hearth, so i don't think i could get away with placing it on a platform of it's own.
    i wonder if there is another solution...

    shoot, i like the lines, much nicer than anything else i've seen on cl lately. i could build the wet bar out of stock cabs, i guess, but that will be much more $$ and less furniture style.
    i plan on having the espresso machine (kind of a precursor to keurig, as it uses 'pods' instead of jcups), an electric kettle and the sink.
    the upper will be for glassware and cups and a bit of display.
    the other side of the bottom i can use for extra pods, tea, etc.

    thanks for your input, as soon as the roads clear up i'll go see it in person.