Software
Houzz Logo Print
jenfenn

looking for largest possible sink in 30' base

18 years ago

I can only squeeze a 30" sink base in our kitchen, and it means that I'm going down to a single bowl from a 1 1/2 bowl sink. I want to go undermount, so what's the largest sink (width) that I can get?

Comments (7)

  • 18 years ago

    You should be able to put a 28" sink in a 30" cabinet. My daughter's Elkay 2816 undermount is in her 30" cab - they just have to notch it. We were going to have a 30" also with the same sink, but at the last minute, decided to change it to a 33 because we are putting in an undercounter water filtration unit and just figured we should give ourselves a little more space under there, what with the garbage disposal and space for dw. detergent, etc.

    I believe Elkay is the only one who makes a 28" and it is a good sink.

  • 18 years ago

    Thanks, raynag. I went to the Elkay website to check it out. It says on the specs (see link below) that the minimum cabinet size should be 36". So when you said that they had to "notch" your daughters cab in order to get that size in, what exactly does that mean? Will an installer be familiar with this?

    Here is a link that might be useful: elkay2816 specs

  • 18 years ago

    We have a sink that's 30" from side to side at the top flange, whose 10" deep basin fits very neatly into a 30" cabinet. Obviously, though, the flange has to sit on top of the walls of the cabinet, so that's what supports the sink instead of it being hung from the counter above. This is not recommended in general. If we ever had any problems with the sink the whole thing would have to be torn up to replace it. I thought that was an acceptable risk to take, and I love having as big a sink as I want with as little undersink cabinet as possible.

  • 18 years ago

    We are in the same boat. Based on reviews here, we want the Franke Orca. It's actually 31" and our sinkbase is 30". The KD said she used it on her brother's house and it was "swimming" in a 33" base. Our GC is going to notch out the sides of the cabinet a bit also. He says this is very common because of the sizes the sinks come in.

  • 18 years ago

    I didn't know about the notching out thing.... if so, maybe we'd have made a different decision, but with our 31" sink base we went with an Elkay Avado sink EFU2115.

    I ordered it on Home and Stone and got it 2 days later. The price was far less than anything I saw elsewhere. I ordered a Rohl faucet as well which hasn't arrived yet. I thought that price was very good too.

    There is also an EFU2815 that you might want to check out.

  • 18 years ago

    My cabinet guy (who is the same one my daughter used) said no problem doing it - any contractor worth his salt knows how to do whatever has to be done (what Rosie said, I think). The 36" cabinet for a 28 (or really, 29-1/5") undermount sink is ridiculous. I'm doing 33, as I said - and will have plenty of room. My contractor didn't bat an eyelash.

  • 18 years ago

    Thanks so much!! I was worried that I was limited to a 22" sink or something along those lines. I'm feeling so much better about my sink possibilities now. Hooray.