Software
Houzz Logo Print
lynw_gw

Educate me on Sinks please

18 years ago

I am at the point of have to look for our sinks. Main sink is in a 30" cabinet and will be undermounted single bowl. Prep sink is in island 15" cabinet. Undermounted and will be used for rinsing vegetables, etc. I would like a disposal in both. What do I need to know, look for? What mistakes should I try and avoid? Can't thank you enough. These boards have some of the most informed and helpful people!

Comments (3)

  • 18 years ago

    one thing i didn't realize relates to sink depth.i got a 7.5" deep sink, which is theoretically 9.75" deep when you undermount it under 3 cm granite. it is not a problem - i actually like it - but just something to be aware of, esp. if you order a deeper, ie 10" sink.

  • 18 years ago

    Make sure you know what kind of disposal you want --- and get its dimensions, along with the depth of the sink to make sure it will fit in your cabinet. Batch feed disposals are larger than continuous feed, so if you are looking at batch feed, keep that in mind. Also, if you intend to put anything else underneath the main sink, i.e., an r/o or filtered water system, make sure you know what the dimensions of those things are, too. Finally, decide how many accessories you will have around your sink, and thus, how many holes will be needed in the countertop, i.e., air gap? faucet plus sidespray or pull out/pull down faucet? soap dispenser? filtered water or insta-hot? air switch? Etc....

  • 18 years ago

    You should decide on the shape and configuration of the sink you want, particularly the main sink. There's the double-bowl or single-bowl decision, which has been discussed A LOT on this forum, so just do a search for threads (try a search for "single bowl sink"). I myself like a single bowl. There's no right or wrong answer - it's personal preference, and how you work in your kitchen.

    Also, you'll need to decide whether you want a rectangular sink or a D-shaped sink. I think the rectangular sinks are a more efficient use of space. Some people feel the D-shaped sinks are more aesthetically pleasing, but you do lose some sink capacity with its curved corners. There is also a rectangular "zero radius" sink, meaning very sharp 90-degree corners. It's a very professional sleek look, but there have been reports that the sharp corners are hard to clean. Many rectangular sinks have softer corners, so no problems cleaning.

    Also, there is drain placement, particularly with a single bowl sink. If the drain is towards the rear (vs. the center), you will be able to have dishes and pans in the sink without covering up the drain hole. Even some double bowl sinks have rear drain holes. But to echo Amsunshine, you'll need to make sure your disposal will fit with the clearance available with a rear drain.

    As to material - you could read on this forum for hours on the merits of fireclay, stainless steel, silgranite, soapstone, cast iron. There are pros and cons of each, both functionally and aesthetically, which are discussed at length in many threads here.