Software
Houzz Logo Print
ftwpoolgirl

How to Acid Wash Pool Deck

16 years ago

Could someone please post how they acid wash a pool deck? We have aggregate and the pool builder did a horrible job with our deck. Thanks.

Comments (8)

  • 16 years ago

    I would agree with Goyom. The deck sub needs to come back out and do another acid wash. What is was the issue? Not sure what the deck guys use for acid washing, I would think it would be a muratic acid at a ration to water amount. It's not something you want to do on your own, could end up with damage to surrounding rock or other materials in the area.
    Sorry to hear about the mishap with the deck. We had deck issues as well, but did manage to get a new deck out of it which we are really happy with.
    JD

  • 16 years ago

    Thanks to you for replying. The deck crew busted a pipe under the deck and we didn't know until pool startup. Ended up being a pipe to a bubbler. The plumbers broke the deck and found the pipe, fixed it, another crew came out and repaired the deck. It doesn't match. Probably because it is HomeDepot bagged concrete and not poured from a truck like the rest. The deck crew told me to acid wash it and it'd match! I'm thinking not. As they supposedly acid washed the rest of the deck but it is way too gray! Our old pool was also aggregate and not this gray. I was told they waited to long and didn't hand seed it enough. I've requested that the PB come out to personally see it.

    Here is the patch job and you're eyes aren't fooling you...the cut was not straight. We've spent way too much and I hope I'm not being a difficult customer. Would you accept a new pool this way?

    {{!gwi}}

    this is the deck. you can see all the gray and not many stones. they have already acid washed it once. In the upper left corner of the pic you can see the contrast of the patched deck.
    {{!gwi}}

    This is our pool. I really love the way it turned out even with the problems.
    {{!gwi}}

  • 16 years ago

    If it's any consolation we're going through a similar ordeal right now. The crew who acid washed the pool spilled acid on the deck. After 4 attempts at patching over the spots they cut out a section and re-poured. The new section doesn't match the rest of the deck but it isn't as obvious as yours. Our PB is coming out tomorrow morning to decide what to do. I think you should keep pushing for a better fix.

  • 16 years ago

    They either need to fix the issue with that one section...or compensate you accordingly. For me my eyes would always be drawn to that area and it would stick out like a pimple on a bare butt to me! :)

    Pool looks great BTW!

  • 16 years ago

    Has that new section dried yet???
    You really can't compare the color tone of the matrix until it's fully dried and then look at it's color and the exposed peagravel compared the the existing quadrants on the sides.

    Note, I'm not taking your builders side, I'm pointing out my take on your situation.

    See ya,
    Kelly

  • 16 years ago

    They did it on Friday morning last week. Is 5 days enough time for a small 15 sq ft section to dry?

    Hey Kelly, I don't look at it as u taking sides. I posed the question for honest opinions and appreciate the feedback. Thanks for the advice so we can get this resolved.

  • 16 years ago

    Your photos speak volumes.
    I would meet with PB, draw a line in the sand on when an agreed "concrete is cured" date and go from there.

    If it does not match, they need to tear is out and start over.
    It might help if they actually hire someone who has some real experience in color matching.

    You definitely have recourse if they do not fix it, including in my opinion a completely new deck pay off.