Software
Houzz Logo Print
nevets_2009

Stone facing selection on a spa/pool that will not rust

17 years ago

We are installing a pool and having a very difficult selecting stone facing for our spa, so difficult that all progress as stalled until we can get through this decision!

Our spa is raised and attached to our free form gunite pool. The problem we are having is that we want to have a natural stone look to the facing of the spa but we live in New England and have been told to absolutely avoid and stone with a high iron content to avoid rusting issues, not only is the weather an issue but there is a "spill out" on the spa into the pool and the stone will constantly have water on it, we were told field stone and granite are out, and almost all New England stone is out. We have received conflicting advice about the effectiveness of sealing the stone. We have also been told manufactured stone product (concrete facing) will over time be adversely affected by the chemicals and salt in the pool, and would not be of adequate thickness, with the way we built the spa to support a natural stone facing, ideally it would be a stone facing of 3" thickness.

I can't believe how difficult this has been. In the magazines and books we see beautiful stone facing and stone water features in the northeast and we can't get a good answer from dealers and masons we are working with on what we should use on our spa/pool. Please if anyone can help, we would appreciate it greatly!