Software
Houzz Logo Print
206nan

Ideas on how to make this drape

18 years ago

DH doesn't want to block the view and prefers no window treatments but I think it looks so unfinished, I saw these drapes on a link in another thread awhile back an thought I'd try to make them. It may be difficult to tell from this photo but do you think these are simple panels or is the fabric cut so it is much fuller at the bottom?

Comments (24)

  • 18 years ago

    I think they are just panels hung by two loops on the top, and the weight of them causes the sides to collapse in at the top where they are hung, but they are able to spread out more as they get away from the top.

    Honestly, I think the concept is good, but I don't care for the two huge round things for hangers with such a narrow panel. I would rather see something a bit smaller, and perhaps three of them so that they don't collapse so much in the middle and on the sides at the top.

  • 18 years ago

    Thanks Les. I don't like those round things either! So do you think they are hung roughly 6" either side of center? Now I'm trying to decide if there are 2 pleats in that drape.

  • 18 years ago

    Do you have a bay window like the one in the pic or a flat wall? I don't want curtains that actually close so I bought two 14" rods to hand at either side. The curtains will just be for show (I have shutters).

  • 18 years ago

    This isn't a very good picture but I want to make them for these windows.


    Just 4 panels andI'd be happy I think.

  • 18 years ago

    Wow! I wouldn't want to obstruct that view either! Breathtaking!

  • 18 years ago

    I can't remember the poster who had the same type of windows and that was her DH's office space and then across the room was the dining area. Does anyone remember who that was? She bought some curtains and dressed windows like this. If I rememeber correctly she put a valance all the way across and hung some curtains in between the windows. Somebody with a better memory than mine, help!!

  • 18 years ago

    I have these in my living room. I made them about 50% larger than the distance I wanted covered, trimmed them with fringe and hung them from curtain finals I painted black. This is an poor photo I had on hand please excuse the mess....hince my name!LOL

    Oh, forgot I attached a ribbing to tie to the final.

  • 18 years ago

    Sorry for my spelling I should read before sending....hence and ribbon!

  • 18 years ago

    I didn't even notice the spelling, or the ribbing :oP Hence the coffee!

    If you compare the two, I think the first has a bit more fabric on the ends (made larger on bottom than top). I guess the only way to prove that is to have klutter haul herself on a ladder and untie the middle, then poof the bottom :oP What ya doing woman? Heh heh

  • 18 years ago

    That's a beautiful view!

    I'm not sure those draperies are the best choice. In the inspiration photo, the windows are so tall, the single panels work with the windows to emphasize the verticality.

    In your case, your windows are more horizontal, your ceiling not so tall. Hanging drapery panels between the windows will fight with the horizontality (is that a word?) of your windows.

    Is there a reason you need draperies for privacy?

    How much wall space do you have on either side of the windows?

    I'm thinking that hanging a drapery panel on the wall on either side of the windows would look better than hanging anything between the windows.

  • 18 years ago

    no worries

    Here is a link that might be useful: pointing

  • 18 years ago

    Oh my goodness someone needs to kill this spammer! Yes a bathroom shower will take care of the problem! LMAO

    I am going to use a similar style drape (hung from antique crystal door knobs) in my house. It does look nice from an 8' ceiling, and I love the idea for your wall of windows. I'm with you...it needs something. The windows are too bare. This allows for the style, but you aren't going to block the view (I'm doing this on lake view windows).

    Somewhere I have a book on this...but I can't seem to find it :(

  • 18 years ago

    Oh, I love Pointing's idea. Hang a shower head or, what the heck, a toilet seat up there to secure the drapes and you'll be the talk of the neighborhood. What's with this person!!!!!!!! He/she could at least keep the spam on topic.

    But seriously, I get how to anchor the finials because they have screws in the ends (is that strong enough or did you do something additional?) but igloochic-- how are you going to attach the crystal doorknobs? It's a great idea but I used my brain earlier today so it's not responding now. LOL

  • 18 years ago

    They have long metal things sticking out of them that would normally connect them to the other side of the door's doorknob. Since these are going around the edge of the window's and near the ceilings, there are plenty of joists to drill into to anchor them. So you drill in deep and then just screw them in (you want a tight fit).

    Ok I haven't done it yet, I read it in a magazine and saved it for my master suite. :) We'll see if it really works...but I have saved the doorknobs :)

  • 18 years ago

    Thanks, igloochic. Now I get it! You are very creative and I can't wait for the pics.

    This past Tuesday I had dinner in a restaurant that was decorated kinda funky but chic and, at the entryway, it had a swagged lime green velvet drape with silver grommets at the top. The curtain was held up by silver coat hooks like you would have in a mudroom locker. It sounds wierd but looked very cool. It probably wouldn't work in my house but I liked how you can take an everyday object, like a coat hook (or a doorknob) and give it another purpose. Good luck in your search, Nan.

  • 18 years ago

    Hmm... my ceilings are 9.5 feet. Not soaring but I think tall enough to pull this off. I see in the photo it does look a bit squat but IRL I don't get that feeling. I'd hang them close to the ceiling. I like the way the drapes in the top photo are wider at the bottom. So I'm just trying to figure out the best way to achieve that look. Klutter, your ribbon trim is a great idea for attaching the drape. I LOVE your ceiling.
    Our view is forest and Port Madison Bay. We could have a better bay view but we don't want to destroy the trees just so we can see more water.

  • 18 years ago

    I do not think you could get such a clean swag and luxurious flare, like the curtains in the top photo, without a flared fabric cut. And it is probably cut on the bias, as well: potentially expensive, maybe avoidable, and fabric choice would definitely be key to the effect.
    Perhaps a sheer fabric would soften the transition between the curtains and the window by allowing light through. Maybe even partly sheer, like a burnt-out velvet, that ties the feathery cedar leaves into the house.
    in the vein of this: http://www.bedbathstore.com/jashcupafisa.html
    or this: http://www.lotuswhite.com/homeDecor/drapes/p1.htm
    (hope those work if you try them)
    That might get a bit busy, depending on the decor of the rest of the room, though. Well, some thoughts for whatever they're worth...

  • 18 years ago

    Those look to me like linen...not sheer but light weight. The more I look at these the more I'm quite sure they're not straight panels. They just can't be. The center panel might be, but the ends are not.

    Here's what I'd do if I were you (so that you can do this and share the results with us and save ME the work because frankly I'm going to copy this look with the wider base...)

    I think I'd do an unlined, and very cheap fabric just to get a pattern out of...start with perhaps an 18" or 2' center straight cut piece, then add gad I don't know...some long sail shaped pieces, say...well actually use a standard width (54 or 55" and slice it into two triangles. I'd be sure to have at least 8" on either side on the top...maybe six, but not less. sew them together and see what ya get.

    You know if you use a better fabric you'll get a better drape to it, but starting with some cheap walmart cotton ($1 yard stuff) will give you a general idea anyhoo of the fit). I'd wash that crap first and use a good softener. It's normally got some horrible stiffiner that will ruin the drape effect.

    For the real drapes, if they were mine, I'd line the top in the contrasting fabric on the inside so that when you pull the center down, you get the contrasting fabric showing in that pocket.

  • 18 years ago

    Okay Igloochic, I'm off to find cheap fabric. I'm not sure if I'll have time to stitch them up today but I'll post the results as soon as I can.

  • 18 years ago

    I love it when someone does my work for me! I feel like Huck Fin! :oP (Or one of those characters) heh heh

    Really though, I can't wait to see how they turn out! If this works, I can figure out the balance for a finished product and we can talk ourselfs through it :o)

  • 18 years ago

    Wow Igloochic, I thought you were overly optimistic when you said I could get fabric for $1/yrd but you were right! You were right about it being really stiff too.
    So, I'm having trouble getting the top to look anything like the photo. Do I hear Chelone laughing?
    Any ideas?

  • 18 years ago

    My amateurish attempt 1

  • 18 years ago

    Ok a couple of things...first before we do anything else...what's with the bunched up pieces at the top? I'd guess you're trying to immitate the hanger? Instead, try a quick sew on the edges with some scrap ribbon, just one loop on each side. Then hang it over a nail or a screw or a cup hook, whatever, up there so you can see how it would look without the bunched up fabric (which is probably what is keeping it from draping at the top correctly)

    WHen it's hung...a soft karate chop to the center to make that drape/fold happen will show us what we have to work with.

    Now think of this with real fabric...the fabric we eventually use will be softer and flow better, and also have a bit more weight since it's lined. It will do that center thing so much better when it's finished...so go karate chop and lets see what we got!

    (Other than that I think we're on to something...the base is perfect)!

  • 18 years ago

    I was watching this topic in the hopes of learning how to hang the crystal knobs. I have an idea for using these on the ceiling to hang a canopy of sorts above the bed, using satin drapery panels. Any ideas? Or have you tried hanging the knobs yet?

    cheryl