Software
Houzz Logo Print
krisfl_gw

Jandy PDA 6

19 years ago

I would like to know how you like your Jandy PDA 6 and would you get it again if you were building your next pool??? Thanks!!!

Comments (14)

  • 19 years ago

    Don't own one but you can bet it comes at a premium price over other equally suitable products as do most Jandy products.

    Their upgrade to pda kit is a good value but stand alone, I would not pay the price.

  • 19 years ago

    Jandy prices look at the price on the Intellitouch mobiltouch it will blow you away.

  • 19 years ago

    Well yeah, anything automated is way too high. Still! I just hate Jandy and the way they do things with the unnecessary overpackaging of everything and the premium on pricing over the general market for comparable products. I just paid $250.00 for their training when it's a few bucks with Pentair. Oh well, it's a cheap three days off.

  • 19 years ago

    Jandy does tend to give you a little bit better tool package w/ their training. Possibly a better meal too.

  • 19 years ago

    I like our PDA6, sort of.

    I love being able to have it out by the pool, so I can change things without going inside.

    I hate the fact that it's slow as molasses. It can take me a minute or two to turn just a few things on, because of the way it works.

    BTW - the way it works. It appears that the PDA is actually a 'dumb' unit. That is, it only displays what is transmitted to it from the control board, out by the pool equipment. It's got a ridiculously slow processor, since it doesn't need to do any processing. It just displays menus and allows button clicks on each one. Unfortunately, that means that every time you make a selection, it's got to send that to the control board, which makes the adjustments, and then sends the new information to the PDA. Takes forever!

    Also, I'm finding that the PDA can 'miss' button presses, or sometimes delay button presses. The effect is frustrating - I press the button to move down one menu item, nothing happens. Wait, press again. Wait, press again. Aha! now, the selection moves down three! Gah! Sometimes, it'll move down 4 or 5! Grrr.... This can happen with me standing 5 feet from the antenna.

    It's a mixed bag. Love the convenience, hate the slowness.

    Oh, yea. While Jandy advertises that it's waterproof, I'm not going to check that. I'll grab it with wet hands, but it's not going in the pool!

  • 19 years ago

    I have the Jandy PDA RS8 and I too have mixed feelings.
    here are the PROS:
    1. Convenience of being able to adjust anything from anywhere.
    2. Ability to add automation to anything you may add onto the pool, i.e. patio lights, etc.

    CONS:
    1. It is super slow. The PDA has to startup like a computer booting, so when you turn it on, it takes 30 secs to one minute before you can actually do anything. Sometimes it would be faster just to walk over to the equipment pad and do what I need to do, but you can't do that without disabling the remote all together. I can't see any reason why the remote can't be "always on" like all my other remote controls. The delays when pushing buttons is also a big problem!

    2. No automatic backlight. You have to turn on the remote and go down 3 menus to turn the light off and on. For the price, it should have a light sensor that automatically turns the light on in low light environments, or have a setting where it goes on for a set number of seconds with each button press. All you can do is have it on all of the time, which eats up batteries, or off all of the time which makes the remote useless at night.
    3. Not enough "hot buttons". There are two buttons on the front that you can program to do any quick function (turn on spa or turn on lights). For the size of the remote, there can be many more. I need at least 3-4 for functions I do regularly (turn on spa, turn on blower, turn on sheer descents, turn on patio lights, turn on pool lights).
    4. No upgragability. I called Jandy looking for a firmware upgrade and was told that the only way to upgrade the system is to buy a whole new control board from them which essentially means buying a whole new system. That's rediculous. I'm a lover of home automation and have tons of universal remotes and other high end electronics and ALL of them have the ability to get firmware upgrades and are upgraded reguarly. From what I can tell, Jandy hasn't improved the software in years. This is very disappointing for such a "high end" product.

    I would love to have something better, but I'm not prepared to spend another $2K on my one year old pool for it. If you go with this system, I would recommend also getting the spa side controller that allows you to push a button to turn the spa, blower and lights on/off without using the remote.

  • 19 years ago

    Thanks Bubbapool and ianmd68 for your opinions! :)
    I have a friend who has the PDA and I asked her about the slowness on the phone and she agreed with both of you.
    I am going to go over her house tomorrow and try it out for myself!
    I had the Jandy Aqualink system in my pool we built 4 years ago (the system that was mounted in the wall) and we really liked it a lot. Although, we didn't have any problem with slowness as it was hardwired.

  • 19 years ago

    I have a love/hate relationship with the PDA's

    I love the fact that it's an incredibly affordable controller. This and the ease of installation allow me to save some major coin on the incurred construction costs.
    Any cut in cost on my end is a trickle down to buyers. When it costs me less it costs my buyers an equal amount less too.

    I hate the waiting for the handheld to boot up. During the course of my average day I'm busier than you could ever begin to imagine and have little patience for slowness. I've found that I've memorized the number of up or down scrolls, if I press the buttons slowly I'm usually 2 to 4 commands ahead of the controller and it'll catch up and enable. If I press them to rapidly it doesn't recognize the count and enables the wrong thing.

    In spite of its problems I wish I had them on my pool. We have the wall mount controllers in our home near the back door. My children seldomly dry off and wrap with a towel before walking to the inside units. They always leave a snail trail on the floor. Our indoor floor tile becomes very very slippery because of this.

    I have yet to find a better value for an equal controller.

    See ya,
    Kelly

  • 19 years ago

    We have the PDA and all Jandy equipment and we are very happy with all of it it. Yeah the PDA does take about 30 seconds to get going, but really.....30 seconds??? Is 30 seconds really that inconvenient? Relax and enjoy your pool. :)

  • 19 years ago

    Thanks for all the feedback!
    I checked out my friend's PDA and didn't think it was that slow. It wasn't the fastest thing around, but we can deal with it. We talked to the PB and he stated that the newer models have a different chip in them that makes them a little faster than the older models. We are getting the PDA, I'm glad we at least are prepared for the time it will take to boot up and won't be disappointed. Thanks!!!

  • 19 years ago

    I have no experience with the PDA. I write to give you other ideas with the PDA or a hard-wired unit.

    We installed the RS8 with the hard-wired 8-button spa control and could't be happier. The 8-button controller also adjusts and tells you the temperature. I recommend as many zones as possible and that you add relays for things other than the pool. As an example, we ran two relays to hard-wired plugs in which our low-voltage lights are plugged in. Instead of the built-in timers for the low-voltage lights, the Jandy controls the time they go on and off, it can be done in multiple ways, and if you want real privacy, you can turn everything on and off from inside the spa! We did the same thing with 110 volt outside lights that can be turned off from the RS8 panel or in the spa (or automatically).

  • 19 years ago

    What is the cost of the Jandy PDA 6 ? Can it be added later after the pool is done ??

  • 19 years ago

    You can get them on Ebay for about $1000, give or take. I should know, we've been perusing Ebay for a week to buy a new PDA control, since my DH smashed our other one into a billion pieces...

    He got so frustrated with its slowness that he just lost it one day. Of course, there was a crack in the plastic screen from the last time he threw it on the ground, but this time, the lcd screen cracked and it was ruined (it's very tempermental, and not as a result of being thrown on the ground).

    It says it's waterproof, but we got it a little too wet one day and it wigged out the next. Took forever to dry out and act normal again. I would not place it in the water. It's not like we submerged it the whole time, just average use in the hot tub.

    There's a lot of room for improvement with this thing, but we ended up buying a replacement for just the pda on Ebay for about $160, anyway.

    Has anyone heard about the Balboa Poolux model? My husband fell in love with this device on screen, but do not know anyone who owns one. Looks very expensive.

    -April

    Here is a link that might be useful: balboa poolux

  • 19 years ago

    Jandy just introduced a new PDA 3R that is supposed to be faster. I just got an e-mail this morning but did not save it. I believe the product is making it's way to the market or it may be coming to the trade show in November.
    It might be worth looking into before you purchase old technology.