Software
Houzz Logo Print
hmlinca

calcium on tile and stone

17 years ago

I just finished my pool about a month ago and already have a thin white line around the pool water tile, its not very large but it only took a month to develop. I'm going to have my water tested for TDS balance, but what is an efficient way to remove the calcium. I tried a brush but it was very successful, another friend recommended using an s.o.s pad, what does everyone recommend.

I also have a spillway through my spa which is raised approximately 18" and has a stacked stone surfacing. It is sealed with a quality stone sealer from the manufacturer. However, I am starting to see a clouded outline where the water is spilling onto the stone (especially during the filter cycle where the flow rate is low). Any ideas on cleaning the stone to remove the calcium, I would presume that acid would be the best way? I have used acid on the stone previously and know that it is color safe, however I don't want to drain my pool to do this so I would have to live with some acid getting into the pool. Any ideas?

Comments (4)