If it doesn't have an option for intellibrites, then it likely is the old rev.

The only option is to get a new wireless panel.

I am really surprised that your builder is still working off old stock, and in Seattle things tend to sit in distribution for a while, and we have had all 2.0 systems all summer long.

racket,

Thanks - so is the issue the Wireless controller then?

I posted two numbers above, one 2.x and the other 1.x - is the 2.x number the control panel at the pad and the 1.x the wireless controller?

Matt

I am not sure about that, but I would cal pentair tech support @ 1-800-831-7133 they would be happy to explain further.

You need a UOC with version 2.0 or greater. UOC = Universal Outdoor Control board. UWC = Universal Wireless Controller.

I don't believe it... we lost several days during our build because they removed the '1.0' controller and had to go get a '2.0' controller...

If this is not as simple as changing out the wireless unit then I don't think I am going to be able to get this sorted.

Arg.

Thanks for the clear information - I'll see what I can do.

It will be as simple as replacing the wireless board.

You just need a new 2.0 circuit board for the load center. You wireless remote is already version 2.0

EasyTouch Outdoor controller is now up to Firmware version 2.06. It has some cool features for controlling Intellibrite lights and Intellifl pumps, both the VF and VS model. This firmware allows you to control 2 VS pumps and also allows you to preset 8 speeds for the VS.