Software
Houzz Logo Print
stacylh_gw

Cabinets are in, but knobs are OFF!

13 years ago

Our kitchen cabs went in today and I am thrilled with the quality, color, door style, hardware, etc. However, I noticed after the cabinet maker left, with cash in hand, that some knobs appeared to be uneven on the doors. So, I got out my handy level and yes, indeed, they were and, not only that, most all are off to some degree! Nothing major on most of them, but now I am disappointed and my eye is immediately drawn to it.

Most are off so little that the knob will still cover the space if redrilled, so I'm not that worried about it, but some are off maybe a tad more.

The cabs are finished in an off white catalyzed lacquer. Therefore, how noticeable will it be if redrilled and touched up?

We know the cabinet maker personally and I hate to be a B about it nor do I want to over-react or under-react. They will be back in a couple of weeks with bathroom vanities so I could have it fixed then, I suppose.

What would you require if it were your kitchen? How off does it have to be to warrant a re-do?

Thanks!

Comments (14)

  • 13 years ago

    Unless you are looking forward to crooked bathroom vanity knobs you call him up tomorrow and ask him to come correct the problem. Take a critical look at the rest of the build quality, attachment to the wall (did he find studs), are the doors hung properly (check them all out for being hung level, open, close etc) of your cabinets. You want to catch any other problems now. Not being able to install a handle level is kind of a basic skill.

  • 13 years ago

    I know!! His quality is impeccable so that's why I'm so surprised that the stinkin' knobs are off!!

    Does anyone know the proper procedure to correct this? Will the doors have to be resprayed or can the cat lacquer be touched up successfully?

  • 13 years ago

    What kind of knobs do you have ?

    If they are hand made and not unifor - they will never be aligned.

    "The cabs are finished in an off white catalyzed lacquer. Therefore, how noticeable will it be if redrilled and touched up? "

    Very. You'll want a new door in all likelyhood.

  • 13 years ago

    The knobs are round.

    In some cases, it appears that the knobs may not be the same size (maybe different lots) but I'm going to investigate further tomorrow and have my trusty trim carpenter take a look at it. Hopefully, any adjustments will still be covered by the base if the knob :/

    The most noticeable is my 8" handles mounted vertically on the hidden pantry doors. Luckily, the base on those is pretty wide so hopefully any adjustments will be hidden under them by adjusting one down and the other up. However, the backside where the screw is will not be so "hidden".

  • 13 years ago

    Be sure it's the knobs and not the doors. Doors typically need adjustment after installation. If they are good quality, they come with 6 way adjustible hinges and are easy to tweak. If you don't know how, you need to learn, as you may need to do it in the future. So, if it's the doors and not the knobs, get your screwdriver out and start tweaking!

    If it's the knobs, he owes you new doors. And that will be an EXPENSIVE lesson for him. You really can't fill the holes and touch the filler up to be unnoticeable unless the whole door is repainted. (A small scratch or nick, yes. A perfectly round hole, no.) If the cabs are custom, perhaps the maker could do that for you and you not notice it.

  • 13 years ago

    Heck no, I'd be calling him up and very politely explaining my expectations that he returns to correct the problem. Yeesh! I agree that he definitely owes you new doors. Period.

  • 13 years ago

    Wow. who knew? Sorry this happened but thanks for posting. I'll make sure to put a level on mine before anyone is out the door with $$ in hand.

    Keep us posted on what happens.

  • 13 years ago

    I've taken photos with a level on them and emailed to him so hopefully I will get a satisfactory response today. I'm hoping, for his sake and mine, that new doors aren't required but will demand them, if needed.

    The funny/ironic thing was that I half-jokingly made the comment yesterday morning when they asked what DH said about them that he said he'd be happy as long as the knobs were level!! Sheesh, you'd have thought they'd taken the hint and at least double-checked them.

  • 13 years ago

    Depending on the size of his shop the hardware install might have been done by a helper/apprentice, and they might not have the experience to get it right.

    If so and it results in him having to produce new doors/drawers, that will be an expensive lesson about properly training his staff. And if it was done by him personally, that's just sloppy work.

  • 13 years ago

    No, I believe he did it himself. He drilled almost all and installed hardware prior to arrival and drilled the pantry doors onsite because I special ordered those handles. My trusty trim guy looked at them this morning and one set is off by 3/16". He felt the majority could be fixed without major concern. Then, he went on to say that I'm every contractor's worst nightmare because I pick up on the small details quickly whereas most women he deals with don't know how to even use a level....lol. Not sure if that was a compliment or not!

  • 8 years ago

    Sorry to bump an old thread, but does anyone know how long it would take to get new drawer fronts? We are dealing with this issue (crooked knobs) right now and want to know how far this will set back our timeline.

  • 4 years ago

    Wow, I have the same problem and I hope he can fix it, good luck.

  • 4 years ago

    I have the same issue - ugh. I just had my cabinets installed and the guy added the hardware, but some pulls are not even. I noticed it slightly and thought I was being ridiculous and then took a level to them and the doors. It appears that some are off - not a ton, but enough that my eye is drawn to it now and frustrating with a new kitchen. The holes cannot be re-drilled either since it's not off that much. However, to me it's noticeable...drawer is level and then the handle is titled down on the left side about 1/8 of an inch. This reno of the new house has been so stressful that I wish we'd never moved...every little thing has gone wrong.