Software
Houzz Logo Print
smilingjudy_gw

sink base size

18 years ago

I was planning on a 33" sink base to save a couple of inches in my small kitchen. But now that I'm getting deep into sink research, all the ones I want are 33" wide! Seems to me that would require a 36" wide sink base to do an undermount. Someone in a post commented that they had a Blanco 1-3/4 installed in a 33" base, so I'm confused. Guess they could've meant a drop-in. I would rather lose 3" than go back to drop-in.

I thought I was going with a single sink so this would be no big deal, but my mom has just about convinced me I _have_ to have two basins. I'm really liking the SmartDivide-style sinks and the Blanco Cascade Super Single, but they are all 33" wide.

Why, oh, why do I listen to my mother? Please, forum, share your wisdom!

Comments (10)

  • 18 years ago

    You can get a two basin undermount sink in to a 33" sink base as long as it's not an oversized one. The Ticor undermount sink I just bought actually has slightly bigger basins than the overmount sink that I just returned . Galaxy tool was recommended to me by GW post. Price was great, they shipped fast and it arrived last Friday without a scratch. HTH

    Here is a link that might be useful: Undermount sink for my 33 inch base

  • 18 years ago

    In our small kitchen we put in a single bowl Artisan #A2318-D9 undermount SS sink: the inside of the bowl measures 21" x 16" x 9". Fits nicely in the 32" sink base and is large enough for just about anything we need to clean. We also added a grate, and find that this works well for leaving stuff to drip dry. Now that we have a large single bowl, we'd never go back to a double bowl unless we had the room to put in a very large one.

    Here is a link that might be useful: Artisan #A2318-D9 undermount SS sink

  • 18 years ago

    I too want to get rid of the not-so-useful double bowl sink we have and get a single bowl sink that will actually be big enough to clean the stuff that doesn't fit or doesn't go in the dishwasher...

    svwillow1 - why did you go with a 32" sink base (or were you just replacing the sink and not the cabinets?) We are looking at a similar sized sink and am trying to figure out what size cabinet to put it in. TIA

  • 18 years ago

    I have planned for a 33" sink base & have bought a blanco silgranit Diamond U 1 3/4 sink. It is 32" & requires a minimum 33" cabinet base for undermount. The sink hasn't been installed yet (Supposed to start demo in 2 weeks), but I doubled checked with the KD & was told there shouldn't be any problems.

  • 18 years ago

    We got the Ticor S112 for our 33" sink base and it's wonderful! I would never in a million years go back to two basins after having this sink. It's time to ignore Mom. :)

    Here is a link that might be useful: Ticor S112

  • 18 years ago

    kkupstate,

    We had to match new cabinets with existing cabinet sizes so as not to have put in new tile floor.

    Here is a link that might be useful: 32

  • 18 years ago

    My KD suggested that we "scoop" out a little on both sides in the cabinet to allow the sink to fit properly and have the smallest sink base. We wound up getting a Blanco Precis Large Single undermount sink (20") and a 30" base and will not have to scoop. Maybe scooping is an option for you.

  • 18 years ago

    A vote for a 2 basin sink. I know a lot of people here love their giant 1 basin sink, but I always have a lot of pots/pans/knifes/utensils etc that do not go into the dishwasher. I like my 2 basin sink with soapy water on left side and rinse water on right side. The ticor 2 basin sink I got is actually big enough to fit most pots and pans, and half sheet pans will even fit on the left hand side. Never mind Mom, think about how you are going to use the sink and choose the best one for your needs.

  • 18 years ago

    LOL! on ignoring Mom. :) I totally should.

    I had thought of the scooping idea also. Then I thought, "what if you want to switch out the sink down the line?" You can't. This will be my first undermount so I didn't think about the fact that if you switch out the sink, you probably have to replace the counter anyway. Wow.

    Can you tell I'm going 'round and 'round on this one?

    jtalb - Glad to hear this will work. I was really hoping someone would chime in that it is possible. Keep us updated!

    Thanks for the info, everyone. I don't think I'll make the final decision until next week when I install the new window that will sit above the sink. Tangent: There is currently a double-hung above the sink area and anytime I looked out, the stupid divider bar was right in my line of sight. Drove me nuts! I'm replacing it with a double casement. This is also what my mom has so I asked her if it bothered her to look up and see the bar between the windows. She said it didn't. Then when I was visiting at Easter, I realized something. She has a double sink, so when she is standing there she is offset from the bar. LOL! Maybe I will get a single and shift it to the side so this isn't a problem. :)

    Long story short - after I put in the new window, I plan on standing in front of it and deciding if looking at the divider bar bugs me enough to matter. Oh, the little things we obsess over! I just don't want to have to do this again for a very long time.

  • 16 years ago

    What did you end up doing? Any pics?