Software
Houzz Logo Print
nicethyme

grouting polymer clay, my 1st time

18 years ago

I'll share my limited experience now....

I had coated my tiles 3 x with Future floor wax and that seemed very solid and shiny. I applied painters tape over each one to protect the designs from filling with grout. With the tape in place I did nothing special and grout as always. Once the surface had hazed over (the time to wipe it down with dry rag) I cleaned all the exposed tesserae and then proceeded to peel the tape. The tiles were perfect accept for a few areas where the tape pushed back during grouting and those spots felt like the sealant was moist like wet glue... I decided to let it sit and dry which it did and then the grout rubbed away just like it would on glass.

So, it's a "dry clean only!"

Comments (16)

  • 18 years ago

    Excellent...thanks.

  • 18 years ago

    that's cool!!! Thanks so much for the report!

    I will be doing some pc soon after this project. Have a design that has spun in my head for months and have to get it out soon or my head will explode, just been too lazy to switch my studio from glass to clay again :D

  • 18 years ago

    Whew!! I'm so glad it worked out ok.
    I bet they're stunning...hard to tell WITH NO PICS!!!

  • 18 years ago

    FINE!






  • 18 years ago

    OMG That is so wonderful! I love all the sayings on it, they are gonna flip out!!! Yipee!!

  • 18 years ago

    Now thats what I'm talking about!!
    Man, I've never grouted inside a box like that. I bet that was hard to do, eh?

  • 18 years ago

    SUCKED! probably best if you butted all the outer tesserae right up against the box wall and not leave a grout line there - PITA!

  • 18 years ago

    AWESOME NICE! The grout really took it over the top!

    I'm getting ready to grout my box right now.
    I already used the polycrylic on my tiles. Some pealed off
    a little, when I was messing with some bubbles. I went ahead and recoated them all.....without shaking the can like I did last time! I know better than to do that! I don't know what I was thinking.......anyway, I'll let you know how the grouting goes with the polycrylic.

    Hazie

  • 18 years ago

    The shrine turned out GORGEOUS! You did a great job. Your sis will love this!

  • 18 years ago

    wow, that is incredible!! Fantastic job on it!!

  • 18 years ago

    I KNEW you'd bring this off successfully. Way to go, NT. Beautiful job and thanks for the report. Probably never get back to clay but, if I do, I'll remember your caution and proceed accordingly. Very pretty.

  • 18 years ago

    Thanks NT for letting us know how that worked out. Im gonna try that diamond stuff eventually. I like the idea of being able to bake it again to make the coating even stronger..but I dont know when!!!

    I was at Ace hardware yesterday and you would have thought I would remember to check out the Future floor wax but NOOO I had to forget...what a dork!!!

  • 18 years ago

    I just finished grouting the box. The tape doesn't work with polycrylic! It pulls it off. BUT! I grouted the rest without the tape and the polycrylic worked great. It stood up to my regular grouting and all the water just fine. But I'd like to be able to use tape to keep the grout out of the impressions, so there isn't so much clean up. So I don't think I'll use it again.

    Has anyone tried the clay varnish or glaze?
    I bought some yesterday.....might try that too.

    Hazie

  • 18 years ago

    Thanks NT, saving tha info for future reference!!
    maria

  • 18 years ago

    You've also got me digging into my clay again....... Good grief.. I can't take it! My head is exploding with more ideas. I am already ADD... I can't even drive without seeing something mosaiced or clayed ..
    Exquisite tiles and box and picture you made.
    Lori

  • 18 years ago

    Gosh that turned out great. I am so intrigued by the clay tiles, thanks for sharing your trial with these. Great project.
    Cindy

Sponsored
AIS Renovations
Average rating: 4.5 out of 5 stars15 Reviews
Custom Craftsmanship & Construction Solutions in Franklin County, Ohio