Software
Houzz Logo Print
siriusmosaics

Christmas Tree #1 Done

18 years ago

Now I know why I haven't seen any Mosaic Christmas Trees, because they are a pain to create. I dug out the rhinestones after grouting since they seemed to lose their brillance and replaced them with the milliefiori. I used a thin drill bit and attached each ornament before grouting with a thin piece of copper wire. The base is covered with little leaves, something I said I would never do again, but bigger pieces just didn't look right. So one down, 3 trees to go. I actually have 2 others started, just not complete.

{{!gwi}}

{{!gwi}}

Comments (24)

  • 18 years ago

    Sirius, that is beautiful! The intricate details with the ornaments is very unique. I can see why you said you wouldn't do the leaves again - geez that's a lot of nippin' going on there. Very nice piece! This will make nice gifts!

  • 18 years ago

    Your detail in the tree is wonderful! I can see why the leaves would be a pita, but they are wonderful. The milliefiori really look like garland, too. The rhinestones were pretty...I wonder if it would be possible to stick them in after grouting. Would the grout hold them like thinset would???

    Pat

  • 18 years ago

    Very nice, and I'm sure the leaves were a ton of work. I think they'll look wonderful all together when you are done,
    Cindy

  • 18 years ago

    That is so cute! I love the milliefiori and the ornaments too. I can't even imagine how you did those little leaves. They are going to make a perfect gift.

  • 18 years ago

    wow! look at those little leaves! WOW!

  • 18 years ago

    What a perfect tree! The milliefiori makes a great garland.
    That is just too cool! I can't belive you cut that many leaves! Wow! Very pretty Sirius.

    Hazie

  • 18 years ago

    Ditto!! Very festive.

  • 18 years ago

    Wow, that is siriusly beautiful! :)

    Such tiny, tiny, pieces. And so precise. Beautiful work, as usual. I can appreciate the amount of time you must have spent on this.

  • 18 years ago

    Oh Wow...and the little leaves on the base...whew.....Love the milliefiori for the garland..........what a special gift...........boy, that was a lot of labor of love...very unique and beautiful!

  • 18 years ago

    That is "sirius-ly" beautiful!
    I really like the garland the way it ended up. Adds more color and pattern than the rhinestones would've.
    That sho ain't no Charlie Brown tree!! Great Job!

  • 18 years ago

    Thanks everyone for the nice comments. It will help me plug along at the 3 I have left to do. Those leaves took probably a good 2 hours to cut. I found I'm not done either. After thinking about different designs, leaves look best on the base, so all 4 tree bases will be leaves.

  • 18 years ago

    Well, you have a lot of patience! It shows in the details in the finished project!! Very pretty!!

    Maria

  • 18 years ago

    Sirus this is wonderful!! Wow those tiny holly leaves. No wonder you do not want to do them again!!! But they are so perfect!!

    Very nice!!! My kind of Christmas tree!!!

    Chris

  • 18 years ago

    Siruis- Wow that really turned out awesome. I liked the rhinstones but I LOVE the milliefori (sp?) It just sets it off. I cannot imagine hanging all those ornaments the way you did but man do they look great!!!! It had to be a pita to grout around them!!!! As far as those leaves...I did a mosaic platter fern once all made of leaves and boy did I vow never to do another one of those!!! Your leaves look great you did such a great job!!!

  • 18 years ago

    I'm Amazed at how all your glass pieces seem to "match up" - there's got to be a trick to that !

    I really love that tree !

  • 18 years ago

    That is a beautiful tree! Love the milliefiore garlands, what a great idea. And the ornaments, very pretty.
    Are you giving them as gifts? Hope the receivers know how lucky they are to receive them.
    Ingrid-Em

  • 18 years ago

    Beautiful leaves and the holly leaves a re perfection!!!Will be wonderful when you get all 3 done!

  • 18 years ago

    Yeah grouting around each bulb was a treat. I had them wrapped up with the blue tape, but still got some grout on them. And drilling the holes for the wire to go through - well, I broke 3 bits. My DH warned me they were very thin and fragile. In fact, one bit has become one with the tree - still stuck inside the wood. Three out of the four trees will be gifts. The last one I do will be for me. Cutting the leaves has now left both the first 3 fingers on each hand with teensy cuts all over each. Was ouchy for a day, but the work must go on!

  • 18 years ago

    Oh, how pretty, and such a great idea, and so very neatly worked. I know what you mean about repeating things - gets boring after a couple, huh? You could attach ornaments on each point to the boughs for variety, as well as a star on top. Just a suggestion.

  • 18 years ago

    Im not sure I read how you did the ornaments correctly, but could you not insert the wires into the wood, grout them in and then attach the ornaments and trim any excess? Then maybe it wouldnt be so hard to grout around the ornaments.

  • 18 years ago

    OH i just love it. They are so cool.

  • 18 years ago

    WOW!! I LOVE those bulbs and just EVERYTHING!!! Way to GO!!!

  • 18 years ago

    Wow! I keep coming back to look at your tree... it's wonderful!!! the millifiori and the tiny ornaments are perfect for it! Super job!!!
    Katie

  • 18 years ago

    I didn't think that maybe I could have grouted the wire in first - maybe I'll try that on another one. I forgot that I do have some stars to put at the tops of the trees, just not sure I was going to use them. The ones I've found so far look kind of cheap.

Sponsored