As far as the tilt-out - we went with 2 pulls. You have to have something don't you? Otherwise, how would you tilt it out? I recall seeing in previous posts, some of the shorter ladies not wanting handles on it because they hit their hips while using the sink. I don't have that problem - I am 5'9" tall. :)

We matched the number of handles that we had on our pot drawers. Our pot drawers were only 30" and we put 1 handle on them, so we put 1 handle on the sink tilt out. I don't think there is a hard rule, just what looks right for you! Good Luck!

You may need two on your tilt-out - one in the center may not be enough to pull it out

alg1026 - check out the post titled "Knobs,bin pulls,long pulls,help!". Some people use two pulls on cabinets that are 30" or wider, some say 27" or wider. Also, I've learned to consider using two pulls where you have two cabinet doors below the drawer. Like boxiebabe, I used two pulls. Below is a picture of my 29" tilt out using two 5" pulls. The second picture shows how it's centered over the door below. I'm 5'6" - The pulls don't hit my hips or bother me when I'm working at the sink. I agree with ngng...you have to go with what looks right for you. I used some strips of masking tape on the cabinets/drawers to help me visualize how it was going to look.

Thanks all, this is very helpful! We do not have the cabinets yet, so it very well may be that we have two separate tilt-outs. And it is a 33" sink base, so we may need to go with two handles.