Software
Houzz Logo Print
mariposatraicionera

Best tile sealer?

What sealer did you use for your kitchen floor tiles?

Comments (15)

  • 19 years ago

    What kind of tile? I used AquaMix Gold 15 on my travertine entry floor.
    Monica

  • 19 years ago

    Porcelain tiles. They said something about a sealer for the grout, but mentioned a spray which I thought I read somewhere had caused respiratory problems.

  • 19 years ago

    I have respiratory issues, so for my porcelain tile I bought a spray bottle of Stone Spray-N-Seal made by Stone Care International and I'm painting it onto my grout with a small brush.

  • 19 years ago

    Great idea Epicure! Are you applying it to wall tiles or floor tiles?

  • 19 years ago

    I don't think porcelain requires sealing. Are they glazed or unglazed? Glazed won't take the sealer. I've read both to seal and not to seal unglazed porcelain.
    Yes, the grout DOES need to be sealed.
    Monica

  • 19 years ago

    It's an unglazed porcelain and they said it will need to be sealed as well as the grout. I knew about the grout, but the porcelain as well??

  • 19 years ago

    I'm applying it to the grout for both my floor tiles and my backsplash.

  • 19 years ago

    They said something about a sealer for the grout, but mentioned a spray which I thought I read somewhere had caused respiratory problems.

    Here is a link that might be useful: N.Y.Times-- Stand N Seal Article

  • 19 years ago

    Skipe the SCI spray sealer, it's a PIA IMO. We used it on our travertine tiles/grout downstairs, and it left a film on the tiles despite following the instructions to a "T." We had to re-spray and scrub off the residue while it was wet, one small section at a time--ugh!

    The tile place for our backsplash tiles (Artistic Tile) sold us a 15 year sealer for our glass tiled backsplash. The glass tiles obviously didn't need sealing (non-porous) but the white grout did. The stuff wiped on like water and wiped off the tiles just as easily. It's Aquamix Sealer's Choice Gold.

  • 19 years ago

    Hey, thanks guys! I found out that my tiles did NOT need sealing as was first told to me. However, I am now being told that my grout has antimicrobial protection and does not need sealing. Yeah, right! I am going to look into the Miracle 511 and Aquamix Gold.

    BTW, what did you use to clean your new tiles? I was told that I need an acid wash solution the first week? Somehow that does not sound too right, but thought I'd check with you guys anyway.

    Mari

  • 19 years ago

    Never have heard of needing an acid wash. Just clean grout off tile face with water and some rubbing if it's dried on the tile face. (Your tile layer should have cleaned up so there's no grout residue on the tile at all.)

    Use the very small squeeze bottle with a narrow applicator (pointy tip opening) made to flow Miracle 511 onto the grout lines only. Wipe up immediately with a paper towel any of the sealer that might get onto the tile because you squeezed the little bottle too hard.

  • 19 years ago

    Teedup, he's coming back tomorrow to check the floor. I'm also very upset that we agreed on the grout being a shade darker than the tile and it ended up being three shades lighter. The tile store said that it takes awhile to cure and might darken. Is this true?

    I am not letting this guy use any acid on my floor! He did that before setting the tiles, and I could understand the concept because of dirt and grease, but not on new tiles.

    If the grout was done yesterday, when is a good time to apply the sealer? I read somewhere that Aquamix has a sealer and colorant?

  • 19 years ago

    You can seal grout 48 hours after grouting. I used two coats of sealer (AquaMix Gold-15) waiting 1 hour between coats. It's been almost 10 years since I sealed our grout on that new light almond colored, slate-look porcelain tiled entry, family room, kitchen and two baths. That grout is still the identical color of the tile. No stains on my grout lines either, even after all this time...I vacuum and spot clean the floor often and of course don't slop a mop with dirty water over the whole thing but rather clean the tiles individually with Mr. Clean and water when needed, which is very seldom.

    However, at the same time, outside on top of a concrete patio we tiled another 950 sq. ft. of porcelain tile of a different size and color and also matched that grout color to that much darker tile color. That grout turned at least three shades lighter than the tile by the VERY NEXT DAY! Sealing it did not change the grout color at all and we're used to it now.

    If you too are grout sealing lots of square footage, your knees will appreciate some knee pads for all the crawling around involved. LOL


  • 19 years ago

    This guy used Mapei grout, and I chose the colour from a strip that looked darker than my tiles. While he was putting it on, the thing looked so much darker than the tile (didn't remember it was WET), so I was a happy camper. Got up this morning and horror of all horrors, it's a light gray!

    One thing that's weird though is that he left some of the mixed grout in the garage, and it's still very dark.

    Knee pads? Gotcha!lol