Software
Houzz Logo Print
spydermurphey

Outlet in island

16 years ago

We in the home stretch and should be enjoying the new kitchen next week. We are putting an electrical outlet in one end of the island and in my mind, I envisioned it being horizontal and as high up as possible. My contractor says he always puts them vertically. Does anyone have outlets in the sides of their island or cabinets? And if so are they horizontal or vertical?

Comments (16)

  • 16 years ago

    It is code where we live. Reason is to prevent you from running an extension cord across the floor to use an electrical appliance on the island
    When needed.

  • 16 years ago

    That's one of the laziest things I've ever heard! As long is there aren't any structural underpinnings in the way, you can have them go any way you want. Stamp your feet and have a hissy fit if you need to.

  • 16 years ago

    Bilp's response is about having an outlet in the island altogether (I think in answer to the thread title, rather than the horizontal vs. vertical question).

  • 16 years ago

    Yes plllog, my question is should it be horizontal or vertical? I should have expanded the title of the thread.We are definitely putting one in, even though I hate the thought of cutting into that beautiful wood.

  • 16 years ago

    We have two on the outside sides of the island that are horizontal. I wanted them as high up as possible, so they are hiding under the counter/less visible. The electrician had to put them a certain distance below the counter to meet code (they look to be about 6 inches below.) I never specified horizontal vs. vertical so I'm guessing he did that because of my request to hide them. They turned out looking just fine! One, in particular, is my most-used outlet in the kitchen. I am currently sitting at the island, with my laptop plugged into it.... ;)

  • 16 years ago

    I was going to have ours done horizontal, but there was room only to do it vertical. We have drawers in that end cabinet, and while there was room to fit the outlet vertically behind the drawers, there was no room to do it horizontaly. I hated the thought of cutting into the sleek panel on the end, but it had to be done.

    I will say, though, that we only put the outlet on one end. There should be one on the other end, too, but I knew we wouldn't use it, and it would be on the end of the island that is seen when entering the house. All the wiring is in place inside the cabinet and I have the outlet, box and cover right there in a drawer. DH can install that outlet easily if and when we need to.

    Of course we were DIY in a rural county that really doesn't care what you do. Most folks would not be able to do this and I wouldn't recommend it. Do as I say, not as I do.

  • 16 years ago

    My new kitchen has a horizontal outlet in the island's end panel. Very convenient and useful!

    Helene

  • 16 years ago

    Horizontal, high up and hardly noticed.

  • 16 years ago

    Thanks for all the responses! You've reinforced my thoughts that it should go horizontal.

  • 16 years ago

    Mine were installed horizontally at the ends of my peninsulas.

    One question, though, have you considered plug/wire mold instead? Plug/wire mold is a strip of outlets that can be installed directly under the counter so it's partially hidden from view. Another place for Plug/wire mold is under the upper cabinets so outlets don't interrupt your backsplash...particularly if you have a tile, granite, or other non-painted wall backsplash.

  • 16 years ago

    Somewhat off topic...I insisted on one plug at floor level on the end of peninsula, accessible from 3 directions. This is to be my vacuum cleaner plug, etc. Have been surprised how many times we've used it since installation, although it's often been connected with construction currently. (pun intended). I like horizontal mounting because heavy, chunky plug-in thingies don't sag when in that position.

    By the way, DH could care less which way an outlet is positioned. I insisted that all outlets have the grounding plug pointing either down or on left. He thought I was nit-picking, but it definitely makes things go more efficiently when using appliances. I don't have to get my old eyes right down to the outlet face in order to discern which hole is the larger prong hole.

  • 16 years ago

    We have two on our island, one on the end (just under the tabletop), and another on the side of the island. Both are horizontal. We got unfinished cherry switchplates from Arnev.com, specifying which way we wanted the grain to run, and then had our cab manufacturer stain/finish the switchplates to match our cabs. They look great (IMHO!).

  • 16 years ago

    another vote for horizontal.
    I really think that electricians are just so used to doing it vertically that they cannot see anything different.
    Aesthetically horizontal is better, especially if you can see it.

  • 16 years ago

    try these, www.sillites.com

    Awesone and EASY!!

  • 16 years ago

    We have a Sillite. Love it.

  • 16 years ago

    Also, think about color.

    Our island is cherry and the outlet there is brown. Blends in very well.