Software
Houzz Logo Print
carra123

Apron sink question

13 years ago

We are getting ready to start our new construction in a few weeks. My kitchen is currently designed with an undermount sink on a 36 inch sink base. I was considering doing an apron sink instead. I know NOTHING about apron sinks....... what size would I need to look for to go on a 36 inch cabinet? Pros and cons to apron sinks? Thanks!

Comments (12)

  • 13 years ago

    I have a 30" wide, 10" high, 18.5 " deep soapstone sink
    I purchased an apron front sink base which needed to be trimmed from 6" openig to 10" opening for the sink.

    Additionally the carpenter added supports for the sink.
    I'm getting the plumbing set up tommorow.

  • 13 years ago

    You could use either a 30" or 33" apron sink in a 36" base. Just depends upon how much wood you want showing beside the sink edges. Keep in mind that the wood supports for a 30" sink in a 36" base will protrude further into the cabinet.

  • 13 years ago

    I have a 33" stainless apron front sink (single bowl) in a 36" cabinet. I went with 33" since that's what I had before (although double bowl). It is BIG! It's also 10" deep which to be honest takes a bit getting used to (have to reach down pretty far).

    I went with apron front simply because I liked the look.

    The one argument I've seen others say for apron front is that it's supposedly more ergonomic since the sink is closer to your body, but I don't think it's any more ergonomic than my old sink, from that perspective.

  • 13 years ago

    i went with a 33" sink in a 34.5" base (i think the minimum amount of wood you might want is 3/4" on either side to provide structural support). the 33" sink is plenty big for my needs, so i am glad i didn't go bigger on the sink.

  • 13 years ago

    My copper apron sink is 30" and fits a 30" base.... it was made that way. Don't know if there are other sinks like that, too?

  • 13 years ago

    Technically, my stainless, apron front is a 30" sink in a 30" cab. But, it depends on the measurements the company is using. My internal bowl width is 27" which seems to be pretty standard of 3" less interior width then the base cab size.

    People do make alterations to cabinets to fit a sink into a smaller cabinet. There are some here on GW that think that is a bad idea. I am not a DIY'er and my cabinet maker insisted on following company specs.

    If you also plan to follow specs, all you need to do is find sinks that you like and the spec sheet should tell you the appropriate size cabinet. Some style of apron front require a larger cabinet with a smaller bowl size due to a large apron, so that is something to consider with the style.

  • 13 years ago

    Mine is also a 30in shaw farm sink in a 30in cab base. My cabinets are full overlay. The cabinet maker needed the actual sink on hand to build the cabinets to fit with support for the base and scribe the front really tight.

  • 13 years ago

    Depends on the sink. There is no one standard "apron sink" design. The way they sit in the cabinet varies and required cabinet size may vary from sink to sink.

    If you find a sink you want to use, the specification sheet for the sink will tell you the cabinet base size required.

    That should be coordinated with the cabinet company to see whether they have an apron sink base standard or need to create one that can be custom cut.

    If you decide to go with a.f. I'd be sure of the sink before placing the cabinet order. There is a range of sink styles on the link.

    Here is a link that might be useful: Farm Sinks

  • 13 years ago

    thanks so much! You all have been very helpful!

  • 9 years ago

    Have a basic 30"sink base cabinet. Is there a stainless apron sink I can order or suggestions as to how to retrofit one? Can one be retrofitted?

  • 9 years ago

    The "short apron" style Kohler Whitehaven (cast iron) and Kohler Vault (stainless steel) are two apron front sinks that can be installed on a standard sink base cabinet. Both come in a "tall apron" style for farm sink base cabinets and a "short apron" style to retrofit on a standard sink base cabinet. I have the Whitehaven and love it. Pics in my "my pics" idea book.

  • 8 years ago

    Your cabinet should measure 3" longer than the sink you are installing in it. For example a 36" sink cabinet base should have a 33" sink installed.