Hi there muskokascp! Did you see the response I posted in the laundry forum for you on the spacing issue you asked about? To answer your question here...we've got a D shaped sink which gives you extra width front to back vs. a standard kitchen sink. Ours is a Luxart LXUS04. The bowl size is 21.25" x 19" and 10" deep. It is very roomy.

http://www.luxartcollection.com/data/Luxart%20Sink%20Brochure.pdf

I also have a Kohler Undertone (I think its model K-3335) that we had purchased off the showroom floor of another plumbing supplier as a backup in case the D sink didn't come in on time. It is also a good size for a laundry room at roughly 18" x 18" x 9.5". Don't know what I'm going to do with it now, though...

http://www.efaucets.com/detail.asp?Product_Id=K-3335-NA

Thanks mydreamhome - I see how the D shaped sink would be a good option in the corner. What is the size of the cabinet it sits in and the length of the angled front? I finally corralled my DH last night to sit down and plan out this room. We are incorporating many of your suggestions. I am going to stack the W/D but put the floor to ceiling cabinet beside the W/D. This allows me to make the cubbie section 6' long - basically 3 x 24 cubbies. Along the wall under the windows I am going to put 2 pull outs for dirty laundry (are yours 18" pullouts?), an open section with shelf for clean laundry in baskets and there may be room for an 18" bank of drawers.

I appreciate all your help!

I have the Kohler Park Falls utility sink in my laundry room. It is 21x22 x13 5/8 . I think it would work fine in a corner cabinet and it is nice and deep. We have it in a 26 inch cabinet. We also have a tall curved faucet that has a pull down spray feature and that works well with the deep sink. Here is a link to it
http://www.us.kohler.com/onlinecatalog/detail.jsp?from=thumb&frm=null&module=Utility+Sinks&item=13189902&prod_num=6655-2U&section=1&category=5&resultPage=0--1254357583

muskokascp-It sounds like everything is coming together nicely for you!!! So will the tall cabinet be in the corner and then the W/D stack next to it, then counter space for folding right next to the W/D?

You are so good on those measurements! Yes, the cabinet fronts on the pullouts are 18" wide. The length of the angled front on the corner cabinet is 16". As far as I know, it is a standard size corner cabinet with an angled front. badgergal does make a very good point about the faucet--having the tall curved faucet with the pull down spray feature works really well with the deep sink. I highly recommend it.

Let me know if I can be of further help :-)