What kind of cabinets are you going with? If semi-custom (ie Medallion, Kraftmaid...etc) you can do a couple of things. This would be VERY difficult to do with stock grade cabinets.

1.order an over refrigerator wall cabinet with modifications (modify width and height to fit your sink). Set sink on top of it. Then apply 1" to 3" columns on both ends to enclose it.

2. Order a farm sink base and modify width.

Here are elevations of both examples above. Hope this helps.

One other tip: You will need to find a cabinet line that will at least do modified width. Medallion does it all: modify width, depth and height. A cabinet line like this is what you need to look for.

Kompy

Thanks this helps.

But i think it would be easier if we could find a 24" farmhouse sink base - and so far, we can't.

This is a good idea, using a refrigerator cabinet - never thought of that!

Thanks again,

Cyndi Lou

Thanks this helps.

But i think it would be easier if we could find a 24" farmhouse sink base - and so far, we can't.

This is a good idea, using a refrigerator cabinet - never thought of that!

Thanks again,

Cyndi Lou

None of my cabinet lines offer a 24" wide farmhouse sink base cabinet. Most offer 30" wide minimum.....so you order it to size at 24" wide. The factory will modify and built it at 24" wide. It's the same as if a manufacturer offered a 24" wide as standard...you just pay a little to have it custom sized.

But I still can't find a cabinet line that will do that. Can you offer recommendations?

thanks