So we solved the problem with the light switches being behind the door with either a 2 way switch to the bedroom side or a motion sensor light.

Now I need to figure out mirror sizes. I will have 3 mirrors total in the bathroom. The first side has 2 . . . one on either side of the corner cabinet. The other side has 1.

I wanted the mirrors all to be framed with a 2 1/2 -3 inch frame.

Option A is to put a 2 inch border all the way around all of the the mirrors. Thus would mean that the switches on side 1 need to be moved over to the left a little bit to make room for the mirror frame but all of the mirrors would be symmetrical on all of the walls.

Option B is to put a 2 inch border on the mirror on side 2 and the mirror to the left of the corner cabinet. Switches would be in the mirror on side 2. The mirror to the right of the corner cabinet would have 8 inches of wall on either side so the switches are not in the mirror. This is how it would look: But the mirror on the left of the corner cabinet would only be 2 inches away from the cabinet = not symmetrical.

Option C would be the same as above but extend the left side of the mirror so that it is 2 inches away from the corner cabinet but the right side is the same, so the mirror is not centered on the vanity.