I have a 46 inch cut, 22 hp, 2002 Troy Bilt walk thru lawn tractor. The gear shift assembly has become very loose and jiggly. I removed the linkage and re-tightened, but this didn't help.
I'm afraid it will all fail bigtime in the middle of leaf season when I'm pulling my Cyclone Rake with the tractor.
I got down far enough to the transmission to pull the "shift lever" part # 747-1140 out of the transmission box. Hard to tell if there is anything wrong with it by looking at it.
Do you think replacing this $30 part may solve the problem, or is it more likely the problem is WITHIN the transmission itself. If so, I guess its time for a new tractor.
Thoughts? Thanks!
rexlex
cometstormOriginal Author
Related Professionals
North Adams Landscape Architects & Landscape Designers · Albany Landscape Contractors · Vincennes Landscape Contractors · Fayetteville Landscape Contractors · Sugar Land Landscape Contractors · Helena Landscape Contractors · Alexandria Architects & Building Designers · Natchitoches Architects & Building Designers · Lewiston Architects & Building Designers · Grand Rapids Architects & Building Designers · Kirksville Architects & Building Designers · Laconia Architects & Building Designers · Nashua Architects & Building Designers · Lima Architects & Building Designers · Scottsbluff Architects & Building Designersrexlex
cometstormOriginal Author