Software
Houzz Logo Print
bonnaccra

At what height should this sconce be placed?

11 years ago

I have vertical sconces (Hinkley Fulton Sconce) and they are tall. We have a 9' high coffered ceiling dining room and they were just installed on the wall too low. I would like to raise them but there are 2 bulbs one on each end so I'm concerned that if the bottom is too low it bothers us at eye level. The center of sconces (height-wise) is currently 58" from the ground. I'm not sure I want to only go with rule of thumbs and would like some experienced advice. Of course we will also use a dimmer on them;) What do you recommend for the height of this vertical sconce in the dining room?

These sconces were suggested from my designer. I have the original sconces I bought which match the chandelier exactly but he felt they were to "matchy-matchy". So you think I should revert to them? Pillar Candle Sconce (Large) Currently they are in my basement as I have had them too long to return.

Comments (14)

  • 11 years ago

    I agree;( Of these, would one of these be your preference? One of course is the exact match from RH - but my designer thought it was too "matchy-matchy".

  • 11 years ago
    last modified: 11 years ago

    I agree with k9arlene.......any bare bulb is going to create glare, plus, those sconces don't seem to have anything in common with the chandy. Since I'm nitpicking here I'll go ahead and say that I also don't like the shadows that the current sconces create....too many angles compared to the lines of the panel and ceiling moldings.

    I like your original sconces but any sconce you choose may require the relocation of the electrical box, so be prepared for an additional electrical expense.

    Just saw your second post.......I would go with either the 2nd or 3rd......whichever is the tallest since I think you need something with a little height. Are the table and chairs staying? Just trying to get an idea of your decorating style.

    bonnaccra thanked annztoo
  • 11 years ago

    Two other options too though riskier and a bit more modern like one we have issue with now;p FYI - my house is 103 years old too so much of my decor is always respecting that though I don't like stodgy stuff either.

  • 11 years ago

    The tables and chair are definitely not staying;) We hired designer to help with living room and dining room though as you can see, I know my style a bit better perhaps;) So here are the looks - round 72" table which we will custom make because it's a large room and these chairs below but haven't decided on wood finish and will have gray fabric on the chair custom made. wall color is farrow&ball bone, and will have gray drapes with stripes which tie into chair fabric. Room is almost square about 16' by 15.5'. And there will be a square custom wool-sisal rug. Things haven't been ordered yet as we are focused on the living room but decided to do electrical work together (and yes I know I will have another electrical expense;( but it's the right thing to do). So please comment on any of these items as I like your insights and we can still change.

  • 11 years ago

    Hmmm, I also like the last two you posted but I'm not sure I would buy and permanently place any sconces until you know what furniture and other wall decor you're going to have along that wall. The builder of my home placed all sconces a little over 7' high, but we have 10+ ceilings. It sounds high but with the arched doors and tall pieces of furniture they work well..........and definitely above eye level. ; )

    bonnaccra thanked annztoo
  • 11 years ago

    The sconces are interesting when turned off, but when lit they have too much glare and annoying shadows. I would just do the RH Pillar sconces. Are you going to have art between the sconces? That should be the statement piece and not the sconces. There is nothing wrong with having a few things that match ... unless your whole house has RH pillar fixtures!


    You table and chairs are a simple modern design ... you could certainly have gone with more of a statement chandelier. A 72" table might get snug in the room, if you start to add sideboards or hutches along the walls. Have you considered a 60" with a leaf for when you have extra guests?

    bonnaccra thanked chispa
  • 11 years ago
    last modified: 11 years ago

    Thanks for the insights. I do not plan to have hutches but likely at least a console/buffet. The round table is more elegant versus oval and based on measurements it should fit well in the room. But I will revisit this before we make anything since that is permanent. Let me go back to the designer as well. My understanding is we will have about 4' to 5' between walls and table before any buffet/console and the console will be less than 24". Again, I want to make sure we think through all of this as I don't want remorse after a custom table is made. Certainly there are more tables that become ovals when enlarged but I do not find them quite as beautiful or elegant as a large round table. hmmm. . . I appreciate your thoughts and everyone else's too. And we do have other RH fixtures but not exclusive (we have a lot of visual comfort too) and none are similar.

    And yes the designer recommended and I envision art between the sconces.

  • 11 years ago
    last modified: 11 years ago

    I don't care for the style of bulbs you are using in the fixtures - I would go frosted tubular or tubular Edison bulbs to see if that helps.

    bonnaccra thanked User
  • 11 years ago
    Thx. I will try that first. I went with the type used on the brands website but I agree I don't like it either:(

    So it's probably try that first then consider another sconce. Which of the pictured sconces above do you like? Thx
  • 11 years ago

    I like your original sconces. Looks like they would set a nice mood for dining compared to these bare bulbs. I personally dont care for the lighting styles that are in right now with all the bare bulbs. This will be imo a trend that doesnt last long.

    bonnaccra thanked User
  • 11 years ago
    last modified: 11 years ago

    bonnaccra

    Thx. I will try that first. I went with the type used on the brands website but I agree I don't like it either:(

    So it's probably try that first then consider another sconce. Which of the pictured sconces above do you like? Thx

    _________________________________________

    I think the sconces you have now are more unique than replacements shown--I do know though I wouldn't do the faux candle sconce that mimics your current chandelier.

    I think like bathroom lighting over sink that runs perpendicular to the mirror, your sconces will look better w/different bulbs and art up between and possibly something under it all aka layering,

    bonnaccra thanked User
  • 11 years ago

    So restoration is allowing me to return the "matchy-match" sconces for an exchange and the ones on the ceiling, I have also negotiated that I can return them. So I think I will go with these: Tall Edison Milk Sconce It alludes to a candle but is not so obtrusive and heavy and it is also decently tall at 17" and 4" wide (one I'm removing is 22" tall though 7" wide). I just think the one installed is too much going on for me to really live with. Please let me know what you think of that one.

  • 11 years ago

    I like the look of sconces 2 & 3 that you posted. Nothing wrong with matching in my opinion but I'm not a designer :) Interested to see what height you settle on for sconces as I am in the process of installing sconces with 9ft ceiling height and a coffered ceiling as well.

Sponsored
Trish Takacs Design
Average rating: 4.9 out of 5 stars36 Reviews
Award Winning & Highly Skilled Kitchen & Bath Designer in Columbus