Ours is about an inch out from counter so 2 inches from cabinet. I don't have a finished picture that shows it as well as this.

In the case of the shaws /\ like above, they usually stick out as far as the beginning of the radiused corners. The other types that are not as gently-rounded could be mounted more flush.

I have a Whitehaus, with the sloped front, It is 1" at the bottom (where it is near the cabinet doors below) and 2" at the top.

The cast iron Kohler design has a shoulder that determines exactly how far it can stick out. Stainless/copper apron sinks are the same way.

Casey

I have a 30" Shaws Original and I gave THIS SINK to my cabinet maker. Every Shaws can be slightly different, so it's important for the cabinet maker to have your sink on hand.

This is from the backsplash to the back edge of the sink as it may be easier for installation that measuring the front reveal. I have a Kohler Artifacts pull-down faucet.

Hope this helps.