Software
Houzz Logo Print
bberger1

faux beam sizes

10 years ago

Need help determining sizes of faux beams for cathedral ceiling in den. Height at peak is 22', sides 12' and walls 10'; the dimensions of the room are 23 x 19. Currently I have selected center beam to be 10w x 12h and side beams to be 8w x 10h. But do they need to be square? I would like to keep with what actual structural beams would be for that sized room and structure. I've attached a picture for the look we are trying to achieve.


Thanks !

Comments (20)

  • 10 years ago

    What does your builder say? I think the square ones are nice.

  • 10 years ago
    We just did our ceiling and we had a 10x12 main beam with 6x8 for the smaller ones. This is pic before we painted them. Our room is about the same size as yours.
  • PRO
    10 years ago
    Not necessarily, do think about this carefully as this is a major focal point in the room. Perhaps this room we designed will help you with this quandary.
  • 10 years ago

    Those beams look structural, Gray and Walter ?

  • 10 years ago
    Kira5817 thank you for the pic and sizes of beams. Would you clarify which is height verses width? Gray and Walter thank you for the advice and pic. would you clarify height and width of center beam and of side beams against ceiling? thx!
  • PRO
    10 years ago
    It is very hard to provide guidance without seeing the space. Just how bulky do you want them. What style? Old World? Scandinavian? With a 22' ceiling 6" depth seems a bit skimpy to me. Might want to make some "mock-ups" out of cardboard to assess on site. Or get trim people to make a couple sample sizes up.
  • PRO
    10 years ago

    Those are better dimensions. Bit beefier and on lower ceiling. Good comparison. Thanks for posting.

  • PRO
    10 years ago

    Bradley_Amber, gorgeous room! Love to see more of it.

  • 10 years ago

    Our master suite is 2-story w/ cathedral ceiling 24' at peak, 16' low side. All my beams are structural. My guess is they're 6x8".

  • 10 years ago
    Thanks, Flo. Here is the link to a recent post where I was asking advice on the room: Check out this discussion on Houzz - http://houzz.com/sr/m=7/u=L2Rpc2N1c3Npb25zLzQwNjQ5NzA=
    I really think the fireplace will be done by the end of the week and I will share!
  • 10 years ago
    last modified: 10 years ago

    I'm looking at my beams. They're more like 6x10 or -12".

  • 10 years ago
    Thanks guys. This helps a lot. Knowing which is length and which is height helps a lot. It just seems that the beams need to be bigger in height and
    smaller in width. The picture I posted looks this way. But finding faux beams like that is challenging. Most are the opposite except center beam.
  • 10 years ago
    Bruce Crawford do you have a pic you could post?
  • 10 years ago
    bradley amber love your beams and the size for the room. I prefer them to be heavy looking. Our house is old world rustic mix.
  • 10 years ago

    BBerger, this is w/ camera on my pitiful Fire HD, so not the best. Hope it helps.

  • 10 years ago

    BBerger, if you're going for Old World rustic look, I don't think you need to have either square corners or same width & height. Old World rustic would have been hand-hewn & thus imperfect. They would have been similar but not exact. Watch a couple episodes of "Barnbuilders" on DIY. You'll see real ones.

  • PRO
    10 years ago

    Yes, with old world charm, beef them up a bit. Not too much but probably 10" deep and 12" across with that 22' ceiling something like that. I would still do some mock-ups just to be sure.

  • 8 years ago

    kira5816 and others - so when you're stating 6 x 8 for smaller beams coming off main one, which is the depth and what is width? We're doing the same look in our kitchen and I'm trying to get an idea of what size to have them made. We, too have the larger middle beam which was already in place when we purchased home. Is the "8" the sides and the "6" the width or other way around?

  • 4 years ago

    Kira5816 can you tell me where you purchased your material for your beams? I need something I can stain.